Author Topic: front wing  (Read 1632 times)

Offline tobybrennan

  • I live here
  • *****
  • Posts: 765
  • GL get out the way, and make way for a 16v anni
front wing
« on: 29 July 2010, 17:37 »
right im trying to remove my driver side front wing

ive undone the three bolts under the bonnet and the three in the wheel arch

but there is still no movent what so ever, i know there is ether one or two by the light but how do i get to them?

i surely dont have to remove the bumper =/

someone PLEASE help

Offline snifferdog

  • I live here
  • *****
  • Posts: 3,048
Re: front wing
« Reply #1 on: 29 July 2010, 18:30 »
Ive done this before, i think the bumper has to come off, the grille definately does! Its been a while so i cant fully remember. Have you removed the glue stuff along the top? Thats pretty tough stuff!

Offline tobybrennan

  • I live here
  • *****
  • Posts: 765
  • GL get out the way, and make way for a 16v anni
Re: front wing
« Reply #2 on: 29 July 2010, 18:38 »
no i haven't i noticed that but yeahh how do i get rid of it

Offline snifferdog

  • I live here
  • *****
  • Posts: 3,048
Re: front wing
« Reply #3 on: 29 July 2010, 18:45 »
With difficulty from what i remember  :grin: I think i wedged something under there and ran it up and down (without bending the top of the wing). Sorry i cant be more help but ive been sleep since i did mine and therefore all knowledge has been lost! :grin: :huh:

Offline tobybrennan

  • I live here
  • *****
  • Posts: 765
  • GL get out the way, and make way for a 16v anni
Re: front wing
« Reply #4 on: 29 July 2010, 19:27 »
ahaa well the wing thats on is scrap so dont need to be too careful

cheers anyway pal

Offline vdubnut

  • Here all the time
  • ****
  • Posts: 275
Re: front wing
« Reply #5 on: 01 August 2010, 23:04 »
2 bolts behind bumper....remove grill and loosen bumper managed to slide bumper end off enough to get to the bolts....had to wedge plastic wedge under wing top to break the glue bond!