Hehe no problem matey.
Well as it happens i took my ISV apart today and cleaned it good n proper. I cleaned it about 12 months ago but it didnt cure my low rev problem. I only soaked the ISV which i dont think does a great deal, maybe a little.
Inside the ISV is a valve on a spring. Make sure the valve goes fully in and out. I used a very small flat bladed screwdriver to push the valve open. Whilst your at it shove some more carb cleaner in there whilst you push the valve open. I had the feeling mine was only moving so far on the spring and since ive cleaned and poked it the car is running alot better. When i touch the throttle now my car only revs to 1600 rpm and not 2000 so there is an improvement!
