Author Topic: anoying problem  (Read 924 times)

Offline steve85

  • Not said much yet
  • **
  • Posts: 23
anoying problem
« on: 09 March 2009, 22:24 »
got an anoying rattle but only when the water temp gets to around 90 degrees. is this a bearing in the water pump gone or is it the common exhaust problem? has anyone had this?????

Offline GOLF_STU

  • I live here
  • *****
  • Posts: 3,515
  • THE_GIT
Re: anoying problem
« Reply #1 on: 09 March 2009, 22:41 »
think it just goes dry  :undecided: dont think there is even any way to lubricate it  :sad:

fear is temporary, regret lasts forever...
V TEC KICKED IN Y'ALL!!!

Offline steve85

  • Not said much yet
  • **
  • Posts: 23
Re: anoying problem
« Reply #2 on: 09 March 2009, 22:47 »
is this bad? it only starts to make the rattle at 2k revs but is very anoying. didnt see how it could be the exhaust or downpipe loose when its fine first thing in the morning when cold. have heard it will be a big job if it is the water pump bearing due to it being run off the cambelt and very hard to get to.

Offline GOLF_STU

  • I live here
  • *****
  • Posts: 3,515
  • THE_GIT
Re: anoying problem
« Reply #3 on: 09 March 2009, 23:04 »
dont think they are too bad just fiddly. must admit i just took mine to a garage and let em do it.

fear is temporary, regret lasts forever...
V TEC KICKED IN Y'ALL!!!