lowering my mk4 gti turbo

[ALEXS1.8T]

hi there iam looking into getin my self a set of the hottunning coilovers .  it says the lowering limit is 120 mm but i have heard people sayin things about the arb??? and 45mm is lowest unless u do something to the arb..... can people please let me know wot needs to be done etc as im looking to go 17`s with as low as i can go  lol thanx alex

[big_vw_ash]

you have to replace with aftermarket arb that has bigger loops as the drive shaft will rub on the standard arb

[richw911]

Going lower than 40mm on a mk4 can result in the front Anti roll bar rubbing the driveshaft. This can be overcome by getting an upgraded ARB.

[ALEXS1.8T]

ne ideas where and how much thanx?

[big_vw_ash]

ne ideas where and how much thanx?

i'd look on fleebay myself  ive heard its a pain in the backside to change tho

[Grand Master Patch]

I'd recommend getting a front and rear kit if your going to get a thicker bar than std.

[jake]

im lowered on 50mm

and my golf hasnt had any problems mate!!

[ALEXS1.8T]

ill keep me eye open on ebay , i wont be changing it if it does need it , straight in garage lol