GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Jungle_Don on 09 December 2008, 21:15
-
theres a 320i e30 in the scrappy with some nice bbs wheels anychange they will fit a mk2?
-
both are 4 x 100 so in that respect yes.
dont know what size the flange is going to be and i dont know what the offset would be, but id imagine they would be fine.
-
Had some on mine, the offset is odd and they caught on my arches but I guess every golf is different.
-
Centre bore is the same, offsets tend to be a bit lower than on the Golf, normally around 25mm or so. From what i've seen the beemers normally have slightly higher profile tyres fitted, which combined with the offset can sometimes cause rubbage when lowered
-
both are 4 x 100 so in that respect yes.
dont know what size the flange is going to be and i dont know what the offset would be, but id imagine they would be fine.
Heh 'flange'.
Technically on the wheel it's 'centrebore'. On the car it's 'hub'.
Still, flange eh.
-
Offset will be out but will fit ok.
-
I have e30 bbs wheels fitted, the ones that look a little like LMs, with 195/50 rubber and not had any probs with rubbing etc and is lowered