GolfGTIforum.co.uk

General => Car audio => Topic started by: mk3robgti on 21 November 2008, 22:25

Title: MK3 how to
Post by: mk3robgti on 21 November 2008, 22:25

hi all,im going to fit my system this weekend but i dont know how to remove the trim that runs beside the seats to run the cables along.could you just let me know the best way to run them please.

cheers rob

Title: Re: MK3 how to
Post by: don_231 on 22 November 2008, 14:58

if i can remember theres literially 2 or 3 screws holding the side trim on.

get a torch.
check the whole length of it.
remove screws.
save screws.
pop of trim. run cables.
fit trim in reverse order

just take your time and be carefull removing the trim as its got to go back in obviouisly. shouldnt be too challanging

Title: Re: MK3 how to
Post by: crazy_e on 28 November 2008, 10:27

if you aint done this already i would sugest you run your cables like i have done on my golf mk3 run then down the middle past the handbreak and that lot it tucks away alot easyer and for short cables it means the cables dont have to go as far then just the power put down the side :)