GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: Rmachines on 16 November 2008, 19:27
-
i just fitted a new lowering kit to my diesel, same as i put in the 1.4 but its knocking like mad over bumps and potholes! seems to be the front and back, its all put back in the same order as the origonal setup but the top mounts of the front shocks dont look right, the top plates under the bonnet seem to be up to high and the bolt will only go on half way, the other side seems to be a bit better. Any ideas?
cheers.
-
This was my front top mounts after fitting the coilovers, as for the rear check your top mounts, I have had 2 sets fail in 6mths.
(http://i125.photobucket.com/albums/p51/jmfangio5/2008_0603mounts0001.jpg)
(http://i125.photobucket.com/albums/p51/jmfangio5/2008_0603mounts0002.jpg)
-
Yea thats like mine but its not failed, i mean i have literaly just put it on and driven it to test it. Must be set wrong or something but i have done this so many times before without problems :undecided: