Model specific boards => Golf mk2 => Topic started by: slammed-gti on 25 September 2008, 20:57
Title: 'o' ring on blue temp sender
Post by: slammed-gti on 25 September 2008, 20:57
i got a new o ring today, but i can't get the sender to sit low enough to put the clip on now :cry: should i have to push on it real hard? :undecided: i'm worried about breaking something else
Title: Re: 'o' ring on blue temp sender
Post by: 2pac on 25 September 2008, 21:27
yes, you should push it hard but not brutally.
Title: Re: 'o' ring on blue temp sender
Post by: rubjonny on 26 September 2008, 08:31
fit the o'ring to the sensor first to make sure its fully seated, then firm pressure should be enough to get the sensor in.
Title: Re: 'o' ring on blue temp sender
Post by: slammed-gti on 26 September 2008, 09:27
thanks I'll go do that right now :cool: thank you Kelly
Title: Re: 'o' ring on blue temp sender
Post by: 2pac on 26 September 2008, 21:41
put it in 2 stages: first lay the sensor into the hole with the o ring on it. second, apply a slight pressure to feel the resistance of the o ring until it's in place. (now these words are in the right thread :grin:).
Title: Re: 'o' ring on blue temp sender
Post by: slammed-gti on 26 September 2008, 22:42
:grin: :grin: :grin: :grin: :grin: :grin: lol got it thanks a bit of a squeeze tho :laugh:
Title: Re: 'o' ring on blue temp sender
Post by: raks.2008 on 28 September 2008, 16:13
Sorry to be a dumb nut but where abouts is the Blue temperature sender? Is it anywhere under the dizzy?