GolfGTIforum.co.uk
Model specific boards => Golf mk5 => Topic started by: Altered Carbon on 12 September 2008, 22:14
-
Hi all,
In the middle of fitting my Parrot MK6100 Bluetooth kit in the Ed30 and was using the excellent guide in the Maintenance section (http://www.golfgtiforum.co.uk/index.php?topic=40928.0) - however, the switched ignition supply source (pin 20 at the back of the heater controls) in this guide is a different coloured wired in mine and doesn't seem to be working properly.
Anyone else used another source for the switched 12v supply the kit needs?
Many thanks!
-
Will this help: http://www.golfgtiforum.co.uk/index.php?topic=54324
-
From other recent posts (and my experience) the two options you have for a switched live are either from the cig light socket or from spare connections in the fuse box.
-
I used both perm 12v and switched 12v feed from spare fuse positions found in the fuse panel at end of dsahboard.
-
Thanks for the replies!
I used both perm 12v and switched 12v feed from spare fuse positions found in the fuse panel at end of dsahboard.
Any idea which spare ones you used?
-
Just to add - managed to find a switched ignition supply at the back of the diagnostic port in the drivers footwell. The one at the rear of the heater control (pin 20) was also a switched supply, but I was happier using the diagnostic port supply instead. Some pics of the Parrot install to follow if anyone is interested!