GolfGTIforum.co.uk

General => The garage => Topic started by: ricky680 on 22 August 2008, 22:46

Title: thinking of buying
Post by: ricky680 on 22 August 2008, 22:46
hi im thinking about buying a golf gti 8v i have seen but the add says it loses revs when changeing down to first ansd pops out of reverse
Title: Re: thinking of buying
Post by: ricky680 on 22 August 2008, 22:47
sorrny ment to cay what could cause the car to lose revs when changing down and what u think the opoping out of revirse its a mk3 8v
Title: Re: thinking of buying
Post by: boneybradley on 22 August 2008, 22:50
popping out of reverse isnt good as the 8v boxes are weak!! it could be simple like the linkage isnt aligned but it could be the box has nearly had it (and they are quite hard to find good!!) and changing down could be many problems but a dirty throttle body, faulty relays or vacuum pipe broke is most common
Title: Re: thinking of buying
Post by: ricky680 on 22 August 2008, 22:54
i do have a golf alreday the engine is f**ked but the gear box is good i have a load more parts i dont mind brekuing mine its upo for 450
Title: Re: thinking of buying
Post by: boneybradley on 22 August 2008, 22:57
as long as its solid (check all the usual rusty places).....£450 sounds ok and having another will make any repairs much cheaper
Title: Re: thinking of buying
Post by: ricky680 on 22 August 2008, 23:03
its an r reg is there any certen years for the engine codes i think i will make an offer for 400 if it looks good the one i have is a p reg
Title: Re: thinking of buying
Post by: boneybradley on 22 August 2008, 23:06
should be same engine between the 2....or 90% will be....£400 will be good but still check for rust as later cars seem to suffer more!!
Title: Re: thinking of buying
Post by: ricky680 on 22 August 2008, 23:08
so apart for the talgate where else should i be looking for rust
Title: Re: thinking of buying
Post by: danny_p on 22 August 2008, 23:11
round the windscreen
Title: Re: thinking of buying
Post by: ricky680 on 22 August 2008, 23:33
hi mate so what would u say i shold look at first for whiy it cuts out sometimes any chanxce it could be the head gasket