GolfGTIforum.co.uk
General => General discussion => Topic started by: 20v on 14 August 2008, 12:19
-
any one no were i can get hold of a complete car loom an engine loom an ecu
for a 1.8t 20v mk4 please
-
VW?
VW breakers?
-
Ebay?
-
Out of a 1.8T Mk4? :rolleyes:
-
you need the clocks and key to match said loom to do a conversion.
-
you need the clocks and key to match said loom to do a conversion.
clocks and keys need to match the ECU, any old loom will do
-
you need the clocks and key to match said loom to do a conversion.
clocks and keys need to match the ECU, any old loom will do
(http://art-smart.ci.manchester.ct.us/images/fiber/loomslideshow/images/rug-loom-usa.jpg)
?
-
That loom looks to old but will defo fit. :grin:
-
when dealing with looms like that, be cautious of pricks
-
when dealing with looms like that, be cautious of pricks
:grin:
-
when dealing with looms like that, be cautious of pricks
Touche :laugh:
-
Give steve's vw dismantlers a try, they have a shop on ebay
-
im doing a complete re wire of the car does it have to be a 1.8t loom an fusebox or will a 1.4 fit
-
im doing a complete re wire of the car does it have to be a 1.8t loom an fusebox or will a 1.4 fit
Are you putting a 1.8 T engine into a 1.4 then ?
If you're doing a swap like that, you will need a matching loom for the 1.8T.
The loom and the fusebox will be different as the 1.8T lump has a whole load of different stuff to connect to, especially a different ECU, clocks and engine sensors.
Check out Ashmond's project thread, he put a 1.8T into his Mk4 1.4, so it shows what he had to do:
http://www.golfgtiforum.co.uk/index.php?topic=58241.0
-
no im puttin a s3 lump into a mk2 3 door ive got an emerald ecu an engine wiring harness
im tryin to fit a mk4 dash into a mk2 so need the loom to get the dash workin
-
20v, it has been deemed that you start a project thread or at least a dub rides thread. :cool:
-
stupid question how i do that lol
-
speak to 'JV' (the first to reply). Send him a message and he should sort you out. You know how to upload pics right? if not then there is a 'how to' guide on here. :smiley:
I wouldnt use a 1.4 dash loom. It may have certain functions missing. Ive never done it myself though
VW breakers/forums are your best bet.