GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: mike.e on 19 April 2004, 07:50

Title: help with fog wiring...please
Post by: mike.e on 19 April 2004, 07:50

trying to work out how the 'ell to install fogs on my valver. the lights went in a treat and luckily the two position switch is in place and wired up. All I need to is connect the loom to the fogs and the wiring 'plug'...

my question is, how on earth do I attach the wire to the No5 slot (as per the 'MFI' style instructions).

Apparently, this plug comes apart and I need to insert from the left side...can anyone assist...

Thanks!

Title: Re:help with fog wiring...please
Post by: richellis on 20 April 2004, 19:45

Get a loom of a car with fogs and the switch. All you need is the loom from a plug on the top of the rad, (round n black) This includes the ind, headlights and the horn. replase with the loom of the car with the fogs, change the swich and job done! Factory fit!

Title: Re: help with fog wiring...please
Post by: DrewGTI on 20 August 2009, 21:35

installed front fogs on my old gti no problems. . . .


done the same on my new one but the connecters that plug into the indicators wont fit as they are not square....


any ideas?  :huh:

Title: Re: help with fog wiring...please
Post by: Andy-H on 21 August 2009, 08:07

I think the plug type changed after '95' so you may have a loom off an older car  :undecided:

Title: Re: help with fog wiring...please
Post by: DrewGTI on 21 August 2009, 16:33

hhhmmm. . thought this but the loom seems in way better nick than mine on  96..


the fogs, headlights and horn is fine. . just the indicators?  :huh:

Title: Re: help with fog wiring...please
Post by: Andy-H on 21 August 2009, 20:45

Did me kid bro's on his 'P' plate that you saw and we had to cut the wires and re-connect the original connectors Mate  :smiley:

The loom I bought was a minter as well............... must have been better looked after than mine  :sad:

Title: Re: help with fog wiring...please
Post by: DrewGTI on 21 August 2009, 21:40

yeah, , guess will have to snip the wires and change them over. . . . .  :sad:

Title: Re: help with fog wiring...please
Post by: Mikester on 22 August 2009, 13:11

I had to snip wires to fit my vento front.

As i bought a 94 front, and i have a 96/7 car.