GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Golf mk4 how to guides + info => Topic started by: richw911 on 05 April 2008, 17:59
-
Today ive almost finished colour codeing my new smaller rear VW badge.
If you old rear badge is anything like mine its gone gray and the rubber on the edge has started peeling from age.
The new one is from the vw sharan and is smaller than the standard mk4 badge (Badge measures 90mm in diameter) -and will sit nicely inside the indent on the tailgate - Nice subtle mod :afro: :wink:
I know lots of you have done this already its one of these mods ive been meaning to do for ages :evil:
When finished should look like this:
(http://i163.photobucket.com/albums/t318/richw911/blackpic.jpg)
To Remove your huge VW frisbee :grin: :
You will need:
1.Sharan Badge- part no 7M3853630AULM approx £20 or so now :sad:
2.Double sided foam /tape
3.Wet and Dry Paper 600/1200
4.Spray paint - Got mine from halfords mixed from paint code :afro:, Lacquer
5.Plastic Primer
6.Stanley knife
Have a look at this and see what you think :smiley:
First thing you need is the rear badge from the vw sharan part no: 7M3853630AULM
(http://i163.photobucket.com/albums/t318/richw911/badge1.jpg)
Heres a pic of the new and old one together:
(http://i163.photobucket.com/albums/t318/richw911/oldandnewbadge.jpg)
Now you need to remove the sticky tape from the badge:
(http://i163.photobucket.com/albums/t318/richw911/badge2.jpg)
(http://i163.photobucket.com/albums/t318/richw911/stickyremove.jpg)
Next you need to remove the glue from the six lugs at the back of the badge i used a stanley knife.
(http://i163.photobucket.com/albums/t318/richw911/plasticremove.jpg)
Now it should come apart and look like this:
(http://i163.photobucket.com/albums/t318/richw911/Sharonbadge1.jpg)
Now use some 600 grit to "key" up the backing of the badge:
(http://i163.photobucket.com/albums/t318/richw911/badge5.jpg)
Then prime with plastic primer, Tip; put the spray can in a tub of hot water to get the paint nice and thin and up to room temp. :wink: :
(http://i163.photobucket.com/albums/t318/richw911/badge6.jpg)
When the primer is completely dry again "key" it up but this time using 1200 grit paper.
Next apply the first coat of your body colour - Take your time and never rush when painting alway wait for the paint to dry completly before next coat:
(http://i163.photobucket.com/albums/t318/richw911/badge7.jpg)
I gave mine three coats - "keying" Each time using 1200 wet and dry paper between coats.
Next when colour paint is completly dry its time for the lacquer- Again you need to use 1200 grit and plenty of water to lose the shiny top coat.
Now this may seem strange to sand the top coat but you need to do this to achieve the correct colour match and for the lacquer to "take" properly.
(http://i163.photobucket.com/albums/t318/richw911/badge8.jpg)
After its completely dry you need to place it back together and re - glue the six lugs where you removed the original glue.
More pics to follow when my lacquer is dry and it is fitted to the car :laugh:
-
proper job ur doing there ricky,cant wait to see it on the car :afro:
-
proper job ur doing there ricky,cant wait to see it on the car :afro:
Thanks mat - if you need any help with yours just give me a shout bud :wink:
-
lookin good rich how long did it take u?
wat was the old 1 like to get off ?
nice cool subtle mod ill be doin mine soon
-
lookin good rich how long did it take u?
wat was the old 1 like to get off ?
nice cool subtle mod ill be doin mine soon
Thanks mate, its taken most of last week - but thats because i was working late some days and allowing 24hr to dry between coats; Golden rule NEVER rush when working with paint! :smiley:
I havent taken my old badge off yet mate so i shall let you know,
Tho is only stuck on so shouldnt be too much of a prob to get off TBH
-
lookin good rich how long did it take u?
wat was the old 1 like to get off ?
nice cool subtle mod ill be doin mine soon
Thanks mate, its taken most of last week - but thats because i was working late some days and allowing 24hr to dry between coats Golden rule NEVER rush when working with paint! :smiley:
I havent taken my old badge off yet mate so i shall let you know,
Tho is only stuck on so shouldnt be too much of a prob to get off TBH
yer know what ur sayin bout rushin lol get some pics up as ur takin it off m8 i seen 1 before and it was pretty messy behind
good luck fella
-
lookin good rich how long did it take u?
wat was the old 1 like to get off ?
nice cool subtle mod ill be doin mine soon
Thanks mate, its taken most of last week - but thats because i was working late some days and allowing 24hr to dry between coats Golden rule NEVER rush when working with paint! :smiley:
I havent taken my old badge off yet mate so i shall let you know,
Tho is only stuck on so shouldnt be too much of a prob to get off TBH
yer know what ur sayin bout rushin lol get some pics up as ur takin it off m8 i seen 1 before and it was pretty messy behind
good luck fella
Ok bud will do cheers :wink:
-
looking good rich
look forward to getting mine :afro: :wink: :grin:
-
yer know what ur sayin bout rushin lol get some pics up as ur takin it off m8 i seen 1 before and it was pretty messy behind
good luck fella
They're pretty easy to get off, prizing the bade off with a bit of heat/hot water to soften the sticky foam pads helps. Stickiness left over can be rubbed off, polished up to clean throughly.
Mines off currently as have been painting it black, but might opt for the sharan badge shorty :smug: looks ace!
-
looking good rich
look forward to getting mine :afro: :wink: :grin:
Cheers rhys :afro: If you like yours will be next :wink:
-
yer know what ur sayin bout rushin lol get some pics up as ur takin it off m8 i seen 1 before and it was pretty messy behind
good luck fella
They're pretty easy to get off, prizing the bade off with a bit of heat/hot water to soften the sticky foam pads helps. Stickiness left over can be rubbed off, polished up to clean throughly.
Mines off currently as have been painting it black, but might opt for the sharan badge shorty :smug: looks ace!
Thanks mate yeah sounds easy enough - Yeah it does make it look just that bit better :laugh:
-
did mine ages ago :wink:
(http://img.photobucket.com/albums/0803/WesRS/DSCF0390.jpg)
-
did mine ages ago :wink:
(http://img.photobucket.com/albums/0803/WesRS/DSCF0390.jpg)
Looks very good mate :afro:
-
shame about the chav in the reflection lol
-
shame about the chav in the reflection lol
lol who is that?
-
me :grin:
-
me :grin:
lol :laugh: :evil:
-
Heres my badge painted finished and put back together:
(http://i163.photobucket.com/albums/t318/richw911/fin2.jpg)
(http://i163.photobucket.com/albums/t318/richw911/fin1.jpg)
Prob fit it next weekend IF it doesnt snow :rolleyes: :grin:
-
looks good mate :afro:
PAH - snow! Where's your commitment?? i've just finished waxing and taking photos in a hail storm!! :shocked: :laugh: :laugh:
-
looks good mate :afro:
PAH - snow! Where's your commitment?? i've just finished waxing and taking photos in a hail storm!! :shocked: :laugh: :laugh:
I know im a wimp :embarassed: lol :grin:
-
Now have the badge fitted heres some more pics:
(http://i163.photobucket.com/albums/t318/richw911/boot.jpg)
(http://i163.photobucket.com/albums/t318/richw911/bootremove.jpg)
(http://i163.photobucket.com/albums/t318/richw911/finsh2.jpg)
(http://i163.photobucket.com/albums/t318/richw911/finsh3.jpg)
Im very pleased with it - tidys up the rear nicely :afro:
-
Very nice :smiley:
-
Very nice :smiley:
Thank you sir :wink:
-
spo on there mate, very nice indead
n1
-
looking good mate top job you done there :smiley:
-
that looks trick mate, good mod!
-
Thanks guys - Next mod is the R32 dog bone mount which is being fitted on sat :afro:
-
good work squire :cool:
-
good work squire :cool:
Thanks bud :afro:
-
here's mine, just finished it tonight...
(http://img329.imageshack.us/img329/9748/13042008233ez2.jpg)
-
here's mine, just finished it tonight...
(http://img329.imageshack.us/img329/9748/13042008233ez2.jpg)
Love it looks so much cleaner, Good job :afro:
-
could have washed the boot :laugh: :laugh:
Rich - i'll have mine tomorrow so will get it in the post to you :afro:
-
Mod squad strikes again !!!!!!!
All looking good guys :)
-
could have washed the boot :laugh: :laugh:
Rich - i'll have mine tomorrow so will get it in the post to you :afro:
Ok bud no probs :afro: :wink:
-
Mod squad strikes again !!!!!!!
All looking good guys :)
lol yeah, Cheers bud :smiley:
-
Stupid question of the day - whats changed (is it just more shinny?) ? Anyone with a before and after shot?
CS
-
Stupid question of the day - whats changed (is it just more shinny?) ? Anyone with a before and after shot?
CS
Smaller badge and you colour code it, here's the two side by side:
(http://i163.photobucket.com/albums/t318/richw911/oldandnewbadge.jpg)
-
Smaller badge and you colour code it, here's the two side by side:
Ooo tidy :) now i see :)
CS
-
Smaller badge and you colour code it, here's the two side by side:
Ooo tidy :) now i see :)
CS
Most people would not notice -only the trained mk4 golf eye :grin: :laugh:
-
and when they do notice it they dont understand!!!!! :grin: :grin: :grin:
its a vw thing u dont get until u own one!!!!!! :afro:
-
***Update****
Ive also just painted my front vw inserts body colour. Gets rid of the faded gray and also matches the rear vw sharon mod nicely :afro:
Heres a few pics:
(http://i163.photobucket.com/albums/t318/richw911/grill1.jpg)
(http://i163.photobucket.com/albums/t318/richw911/grill2.jpg)
(http://i163.photobucket.com/albums/t318/richw911/grill3.jpg)
Hard to see anything in the last pic - Again only a mk4 trained eye would notice this But to me the litttle things MAKE the car :wink:
-
very nice mate i would do mine but as i no what hassle it was taking the grill off i may not bother!!!!!!! :laugh: :laugh: :laugh: :grin: :grin: :grin:
-
very nice mate i would do mine but as i no what hassle it was taking the grill off i may not bother!!!!!!! :laugh: :laugh: :laugh: :grin: :grin: :grin:
Thanks mat :wink: Went back a lot easier now i know how it all fits together lol :grin:
-
Just Rang for another Sharan Badge just to not the part number has now changed to
7M3853630AULM
-
Just Rang for another Sharan Badge just to not the part number has now changed to
7M3853630AULM
Top man Joe :afro:
-
Looks good Rich, and even better "in the flesh" Out of interest, how much was the spray paint mixed up??
-
u missed out a bit attaching the vw logo back to the backing plate thing that u painted... :tongue:
sorry for being a peckerlol
-
Looks good Rich, and even better "in the flesh" Out of interest, how much was the spray paint mixed up??
10 pounds IIRC :wink:
-
u missed out a bit attaching the vw logo back to the backing plate thing that u painted... :tongue:
sorry for being a peckerlol
True :tongue: you just push it back together and put some glue on the parts you removed the original glue from :wink:
-
Got my sharan badge today, just need to paint it now. :smiley:
-
just done mine freshens it up nic, good mod! i stuck it back together with top quality super glue hope that holds as i remove those round melted bits.
(http://i193.photobucket.com/albums/z122/G60GTI16V/My%20Golf%20Valver/DSC00528.jpg)
Also copied rich and done the front as its a bit uneven if i didnt do it is a bit tricky if your not to good at painting as its tight to get the paint in there without applying to much which causes dribble (not nice)
(http://i193.photobucket.com/albums/z122/G60GTI16V/My%20Golf%20Valver/DSC00530.jpg)
-
Good work :cool: :cool: :cool:
-
RIch you should make a job lot and stick them on ebay. Going to do mine when I get chance, probablt make a hash of it though! lol
Nick
-
RIch you should make a job lot and stick them on ebay. Going to do mine when I get chance, probablt make a hash of it though! lol
Nick
I might be able to help you out if you like bud :wink:
-
RIch you should make a job lot and stick them on ebay. Going to do mine when I get chance, probablt make a hash of it though! lol
Nick
I might be able to help you out if you like bud :wink:
Do you still have all the gear? ie primer, blue paint etc? Could be easier than me buying it all?
Obviously I would cover costs etc?
-
RIch you should make a job lot and stick them on ebay. Going to do mine when I get chance, probablt make a hash of it though! lol
Nick
I might be able to help you out if you like bud :wink:
Do you still have all the gear? ie primer, blue paint etc? Could be easier than me buying it all?
Obviously I would cover costs etc?
pm sent :smiley:
-
I will be doing this mod on mine next..
:cool:
Got a VW Sharan Badge from the stealers & just got off my Front VW Grill Badge..
I will be spraying them Matt Black..
Any suggestions what paint to use??..
:smiley:
-
Going to do this mod shortly. Just a question, can i just remove the sharan badge from the backing and just use double sided tape to attach to boot or is there a reason why people use the backing piece
-
Going to do this mod shortly. Just a question, can i just remove the sharan badge from the backing and just use double sided tape to attach to boot or is there a reason why people use the backing piece
Its not flat so not sure that would work - you will have to remove the little lugs also :smiley:
-
how do i get the old badge off the car
-
how do i get the old badge off the car
Pull it :laugh:
-
how do i get the old badge off the car
Pull it :laugh:
no its best to use a hammer and chisel, or nitomors to burn it off.....
ps..you do the above.. i WILL find you, and i WILL hurt you...lol
-
how many bhp`s and talks will this mod add??.. :tongue:
-
how many bhp`s and talks will this mod add??.. :tongue:
at least -2bhp and -1 of torque :grin:
-
Hay all, Done the sharan mod and stuck it on this morning! :grin: :grin:
(http://i885.photobucket.com/albums/ac59/beattie3689/DSC00032.jpg)
-
alright all, could anyone tell me the width of that badge cos i got one i started to spray up and its not off the sharan think its smaller so i dont wanna take my badge off and it look crap and be badgeless!!!
cheers!!!
-
alright all, could anyone tell me the width of that badge cos i got one i started to spray up and its not off the sharan think its smaller so i dont wanna take my badge off and it look crap and be badgeless!!!
cheers!!!
tells you in the first post matei
The new one is from the vw sharan and is smaller than the standard mk4 badge (Badge measures 90mm in diameter) -and will sit nicely inside the indent on the tailgate
-
i used a screwdrive and a cloth but people will shoot me down for that.. just heat it up with a hairdryer get your finger behind and just pull off and then remove excess glue..
-
i used dental floss heated the badge then pulled it down between the badge and car .
-
Boil some water in your kettle... have a brew.. Then the rest of the water pour down badge.. Then dental floss round the back of badge and pull it off. Simples!! :grin: :grin:
-
Hi just seen a sharan badge it says diameter is 81mm? Would this work? Part No is 7M0 853 601 G 639
Thanks its £15 btw :smiley:
-
7M3853630AULM is what you need. I ordered one a couple of days ago with that part no. 22 quid.