GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: THiNK on 05 April 2008, 14:46
-
OK guys,
I pluged in my VagCom (Version 409.1), turned the key so all power was on, but not started.
Started VagCom,
Got the correct com post set and clicked 'Auto Scan'
I then selected
1J - VW G/J/B Mk4
And clicked start.
I went though a load of Baud rate tests then finished.
I'm guessing as nothign spectacluar happened then it hasn't run corrctly.
Can anyone provide any guidance?
Thanks,
CS
-
it should query all the modules and then give you a report listing the errors if any
-
could be just hasnt found any faults?
-
could be just hasnt found any faults?
no you should get something like
Friday,28,September,2007,20:27:10:26703
VAG-COM Version: Release 704.1
Data version: 20070723
Chassis Type: 1J - VW G/J/B Mk4
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75
76
VIN: WVWXYZ Mileage: 134770km/83742miles
-------------------------------------------------------------------------------
Address 01: Engine Labels: None
Part No: 038 906 019 HH
Component: 1,9l R4 EDC G000SG 1491
Coding: 00002
Shop #: WSC 01271
WVWXYZ VWZ6Z0A4095961
No fault code found.
Readiness: 0 0 X X X
-------------------------------------------------------------------------------
Address 03: ABS Brakes Labels: 1C0-907-37x-ASR.LBL
Part No: 1C0 907 379 K
Component: ASR FRONT MK60 0103
Coding: 0021505
Shop #: WSC 01271
No fault code found.
-------------------------------------------------------------------------------
Address 15: Airbags Labels: 6Q0-909-605-VW5.LBL
Part No: 1C0 909 605 A
Component: 27 AIRBAG VW51 01 0004
Coding: 12855
Shop #: WSC 01271
No fault code found.
-------------------------------------------------------------------------------
Address 17: Instruments Labels: 1J0-920-xx5-17.LBL
Part No: 1J0 920 926 C
Component: KOMBI+WEGFAHRS. RB8 V18
Coding: 05414
Shop #: WSC 00000
WVWXYZ VWZ6Z0A4095961
2 Faults Found:
01039 - Coolant Temperature Sensor (G2)
30-10 - Open or Short to Plus - Intermittent
01176 - Key
07-10 - Signal too Low - Intermittent
-------------------------------------------------------------------------------
Address 19: CAN Gateway Labels: 6N0-909-901.LBL
Part No: 6N0 909 901
Component: Gateway K<->CAN 0001
Coding: 00006
Shop #: WSC 01271
No fault code found.
-------------------------------------------------------------------------------
Address 46: Central Conv. Labels: 1C0-959-799.LBL
Part No: 1C0 959 799 B
Component: 1X Komfortgerát HLO 003
Coding: 00258
Shop #: WSC 01271
Part No: 1C2959802A
Component: 1X Tõrsteuer.FS KLO 0004
Part No: 1C2959801A
Component: 1X Tõrsteuer.BF KLO 0004
Part No: 1C0959811A
Component: 1X Tõrsteuer.HL KLO 0004
Part No: 1C0959812A
Component: 1X Tõrsteuer.HR KLO 0004
No fault code found.
-------------------------------------------------------------------------------
Address 55: Xenon Range Labels: None
Part No: 1J0 941 651
Component: Leuchtweitenregel. V07
Coding: 00001
Shop #: WSC 00000
No fault code found.
End --------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
-
I defo don't get that lot!
It just done the scan through the numbers switching between screens then back to the first screen after you click scan.
CS
-
Just ran it again and the same.
I have noticed you have a lot more channels to scan.
Scan: 01 02 03 08 15 16 17 19 22 29 35 36 37 39 46 47 55 56 57 75 76
Did you add these ?
Thanks,
CS
-
Just ran it again and the same.
I have noticed you have a lot more channels to scan.
could be because mines the latest version and the full version
-
hmm might have to invest then :cry:
CS