GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: richard s on 16 March 2008, 21:03

Title: injector question
Post by: richard s on 16 March 2008, 21:03

i have some injectors from a 2.0 8v seat ibiza from when i fitted bottom end but was wondering would i be better off fitting these injectors or not
cheers

Title: Re: injector question
Post by: dan23 on 16 March 2008, 21:08

what engine have you got in your car?

Title: Re: injector question
Post by: richard s on 17 March 2008, 20:33

its a 2.0 agg block with 1.8 pb head

Title: Re: injector question
Post by: dan23 on 17 March 2008, 21:00

should be ok mate, mite pop flames a tad tho

Title: Re: injector question
Post by: Diamond Hell on 17 March 2008, 23:28

If they're injectors designed for use with a 2.0 8V motor and you're running a 2.0 8V motor they really should be about right, unless I'm missing something here.....

A slightly hairier cam and a flowed head with the injectors might improve performance a bit, but you really need to be running a lambda on the management, so the ECU can manage the mixture properly - for that you'd need a Euro loom and chipped ECU.

Title: Re: injector question
Post by: rubjonny on 25 March 2008, 17:15

2.0 ibiza injectors wont fit the pb head, totally the wrong shape.  The PB ones should be more than good enough to run the 2.0 block though :)

Title: Re: injector question
Post by: ben44 on 25 March 2008, 18:27

agg injectors are actually rated lower than pb ones! and they dont fit.  :nerd: