GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: LazyLunatic on 27 February 2008, 00:26
-
Has anyone fitted one of these kits? It is an upgrade from standard CL to RCL.
Not sure how to fit it.
Cheers
LL ;)
-
Think you can pick up a cheap kit to do this, and i hear its simple, not done itmyself but they ahve instructions :/
Not much help i know, but i hear its dead easy if you already have central locking in place.
-
sweet will pick one of these up.
you can get them on ebay for £30, from hong kong probs! :P
Let you know...
-
I dont get the MK3 system! It has the central locking system, so why can you not just add a remote unit to control the vac pump? rarther than have to ditch the stock system and fit solonoids!?
-
Ok got the kit and the instructions are crap or i dont understand them.
The kit has 10 wires that need to be soldered:
-2 for power (+ve and -ve)
-lights
-trunk
-6 are for the central lock; it says in the instructions that 2 go to NC, 2 go to NO and 2 go to COM. But what is NO, NC and COM !!!!
Also I dont quite understand how you can connect it to the lights, so they all flash you lock/unlock the car.
Help!?!??
LL
-
if anyone wants to help I can email the instructions to them. They are in electrical language so I can't read them very well!!!! :laugh:
Cheers
LL ;)
-
send them to me Administrator@rmachines.co.uk I will see if i can make sence of them. i have autodata wiring diagrams here which may help ;)
-
there a doddle to fit the kits with the electric solenoids
-
there a doddle to fit the kits with the electric solenoids
You won't charge much for doing it then? :wink:
-
there a doddle to fit the kits with the electric solenoids
You won't charge much for doing it then? :wink:
lol ,nope
-
i bet your not near south west ... are you? (plz be near south west, preferably in plymouth...)
Local auto electrician, quick job? how much you reckon they would charge to fit it?
Cheers,
LL ;)
-
haha no -im in merseyside -down south you will pay a lot more than up north :wink:
-
hi i just by chance found this how to
hope it helps
http://www.vagparts.com/pages/MK3Golf.htm
-
thats a neat little kit :smiley: but if you dont have central locking its useless :wink:
-
that kit is a simple plug out and plug in new one.
Mine has 10 different colored wires that need to be soldered to the loom on the central locking pump. Oh and none of the colors match! Just need to figure out the wiring diagrams, both in the haynes manual (of central locking) and the instructions; and then match them together 1+1 should equal 2!!!
LL
-
Where are you in the southwest? Im down near camborne, might be quite a way away. I have never fitted one of them to a golf but have done hundreds of alarms and know my way arround the MK3 loom, might be able to give you a hand.
-
Plymouth, Plympton to be exact. It is in Devon, I'm like 30mins from exeter.
CHeers,
LL