GolfGTIforum.co.uk

General => The garage => Topic started by: bundy on 26 February 2008, 18:55

Title: think its fooked!!
Post by: bundy on 26 February 2008, 18:55
ive just been given a mk2 gti 8v theres no smoke from it or anything but its only running on 2 or 3 cylinders. ive cleaned all the plugs and ive got a spark going through each lead, havn't tested the compression in each cylinder yet. if anyones got any idea of what it could be please let me know.
Title: Re: think its fooked!!
Post by: Rmachines on 26 February 2008, 19:45
Make sure the plugs are connected the right way,  (in the correct firing order)  If you muddle them up somtimes it will run but only on 2/3 cylinders!!  Pops and backfired are a common give away.

Check that first because i have done it many times!
It will be somthing like 1-3-4-2  So find out where number 1 is on the dizzy cap and ensure the ones that follow it connect as shown.

On the distributor            Spark plugs
Plug1        --->                Cylinder 1
Plug2        --->                Cylinder 3
Plug3        --->                Cylinder 4
Plug4        --->                Cylinder 2

Sorry if you already knew that, best to make it clear the first tiem just incase you dont know about the firing order  :wink:


By the way,  if you look down on the top of your distributor,  number 1, is TOP RIGHT
 
           2   1
             O
           4   3


Like that ^^^


And if that doesnt work,  you need a compression test  :smiley:
Title: Re: think its fooked!!
Post by: bundy on 26 February 2008, 23:15
nice one thank ya, i just took for granted the bloke that gave me the car had them in he right order i think that 1 and 4 are the wrong way round on it.
Title: Re: think its fooked!!
Post by: Rmachines on 27 February 2008, 11:26
Nice easy fix if it is!   :wink:
Title: Re: think its fooked!!
Post by: bundy on 27 February 2008, 23:28
well, i checked and checked again and they wer ein the right order, took the plugs out of the barrels that werent running and put a bit of oil down to see if that helped and after a very loud bang!!it was still the same so its compression testing time!if that fails new head!