GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: DOCKERMEL on 22 February 2008, 16:19

Title: RAM AIRFILTER
Post by: DOCKERMEL on 22 February 2008, 16:19

hi guys silly one this got some cleaning stuff for my ramair filter,two bottles of some sort of cleaner but no instructions any ideas what to do with it?????? thx

Title: Re: RAM AIRFILTER
Post by: MowatGTI on 22 February 2008, 16:40

I know its not a K&N, but this might help.


http://www.knfilters.com/cleaning.htm

Title: Re: RAM AIRFILTER
Post by: Mikester on 22 February 2008, 23:49

I think you soak them in some cleaner or something, rather than wipe them down..... :/

Title: Re: RAM AIRFILTER
Post by: DazVR6 on 22 February 2008, 23:54

When i cleaned my Raidhp cone on my valver i used the cleaner they sent me, was in spray cans...sprayed on the cleaner, let dry for 10mins then re-applyed the oil. No such hassle with the cone on me vr though as its stainless steel, all i gotta do is wash it with fairy liquid and dry it off :wink:

Title: Re: RAM AIRFILTER
Post by: DOCKERMEL on 23 February 2008, 12:40

thanks still not sure it comes in a plastic bottle with a pointy lid, ones called polymer remover cleaner the other dirt retention polymer. just wondered how to use it as their website is down..thx

Title: Re: RAM AIRFILTER
Post by: Pete Taylor on 23 February 2008, 16:10

the cleaner is a spray. spray it all over the filter, leave for 5 mins then rinse it all off from the inside with hot water. Spray and rinse again if it's still dirty. Leave it to dry out completely then apply the oil from the bottle with the nozzle all over the filter. A little goes a long way!