GolfGTIforum.co.uk

General => The garage => Topic started by: Alps on 29 March 2004, 22:28

Title: Help with knackered alternator bolt
Post by: Alps on 29 March 2004, 22:28

guys/gals, i vetried taking off the alternator on my mk1 and i think the thread on the allen key bolt near the cam belt is knackered as the bolt is tight as ****, whats the best way of getting this out?

cheers

Title: Re:Help with knackered alternator bolt
Post by: mk1 on 29 March 2004, 22:42

Hi Alps, If this is the lower alternator bolt I would take off the cam belt cover, remove the top alternator adjusting bracket  and try to get a good (not worn) 8mm? allen key and push the alternator towards the engine as you try to undo the bolt. Hope this helps.
Steve.

Title: Re:Help with knackered alternator bolt
Post by: Dizzie on 29 March 2004, 23:45

I feel your pain alps. I had the same thing recently. took a while but we got it off in the end and nipped to the scapper for another one.

Title: Re:Help with knackered alternator bolt
Post by: Alps on 30 March 2004, 08:21

cheers guys, already have the spare bolt will need to spend a bit of time doing this is think! may pop to halfords and get a 8mm allen key socket to make life easier!

i`ll let you all know how i get on!

Title: Re:Help with knackered alternator bolt
Post by: VeeDubGTI16v on 30 March 2004, 14:19

just slide a bit of piping/tubing over the allen key to make the lever longer, thus easier to turn.

Title: Re:Help with knackered alternator bolt
Post by: Alps on 30 March 2004, 17:59

done that, bent the normal L shaped Allen key!