GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: MaXXeH on 23 January 2008, 19:36

Title: removing old dv problems help!
Post by: MaXXeH on 23 January 2008, 19:36

i got a forge dv that i need to fit befor remap but i cant get the clip of :(   

it is a round metal sprung clip that hocks on and a small bit of metal that is pinched, can any one help me please i am pulling my hair out i dont no how to get it of

Title: Re: removing old dv problems help!
Post by: rossdj1983 on 23 January 2008, 19:37

sidecutters?

Title: Re: removing old dv problems help!
Post by: richw911 on 23 January 2008, 19:53

Quote from: MaXXeH on 23 January 2008, 19:36

i got a forge dv that i need to fit befor remap but i cant get the clip of :(   

it is a round metal sprung clip that hocks on and a small bit of metal that is pinched, can any one help me please i am pulling my hair out i dont no how to get it of

Cut it with snips then repace it with a new jublee clip. You might also want to get some silicone pipe for the top hose as im sure it will snap when you remove it  :wink:

Title: Re: removing old dv problems help!
Post by: ub7rm on 24 January 2008, 07:47

I had exactly the same problem when I changed mine and yeah a pair of snips will do the job or if you're careful a dremmel type jobbie will do nicely.  Replace with Jubilee clips as previously said.  I found with mine that the top hose was in good condition and I just pulled the old one off (clip and all) and pushed it onto the new DV without having to remove / replace the clip.  Good job too as I couldn't find a jubilee clip small enough to go into the recess at the top.  A year and a half later and its still going strong.

HTH

Title: Re: removing old dv problems help!
Post by: MaXXeH on 24 January 2008, 18:04

yea i got it of today both clips where an arse.  i just used a cable tye for the top pipe.