GolfGTIforum.co.uk

General => Cosmetic and bodywork matters => Topic started by: VR6_ROB on 24 November 2007, 14:02

Title: fitting electric windows
Post by: VR6_ROB on 24 November 2007, 14:02

hey all i have just got myself some electric windows

my car is a 90spec
i think i can manage the runners

i got the switches with the wiring coming out of the back
they seems to be 2 plugs on the end
and 2 or 4 wires also coming out of the switches goin to nowhere

and they is some wires coming off the motor where do these all plug in as i no nothing about electrics

cheers
rob

Title: Re: fitting electric windows
Post by: mattneck(Beavis) on 24 November 2007, 18:40

Hey rob - im literally just doing mine on all 4 doors..

got any photos of whats chopped etc? i can probably advise yer  :smiley:

Title: Re: fitting electric windows
Post by: VR6_ROB on 25 November 2007, 15:18

sorry i got no photos

where do the switches plug into

and the wires coming out of the motors

cheers
rob

Title: Re: fitting electric windows
Post by: mattneck(Beavis) on 25 November 2007, 16:53

theres sould be blocks which fit the switches perfectly.. is it a genuine setup? then from the switches.. hanging off you should have 2 looms from the switches.. for the doiors, one elft one right to a 2 pin plug.. thats goes through the door bellows and into the motors.. and also hanging off the switch loom should be the relay add related gubbins.. relay/thermo fuse/ live/ignlive/earth ETC