GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: kuk sool on 15 March 2004, 15:17
-
hi guys been looking at some cross spoke bk alloys at my local carnoiseur in cambs! the guy saw my mk2 16v and how low it was and said all i need to do is cut the inner arch mouldings on the front to get them to fit as the Bk's are a 17x7 so would only really affect the front not the back is this true!
and does anyone have a detailed document on how to cut the front inner arches to allow these wheels to fit!
thanks
Scott
-
the rear inner arch lips will need rolled otherwise they catch
-
cheers gambit!!
ive been also looking at some borbet C,s which i think look pretty nice on the mk2 which are 15's but 7 wide would these be ok or would i again need soem arch mods!!
ive got the standard bbs alloys on my 16v 91 plate at the mo... i know there 15s but whats the next bit are the 15x5 or 15x6 etc!!!
scott
-
erm im not sure really what im on about but would a
ACE alloys do a cross spoke type design in 16x7 fit would that be better than a 17x7 alloy! or would they scrape the arches just as much
-
just get a nice set of 15's and lower accordingly
7 inch wide is fine, thats what mine are
-
i was thinking about some borbet C's but i dont think borbet do that style anymore!!!
they suit a mk2 what do you think
-
check this site if you havn't already mate.
http://www.styledynamix.co.uk/ (http://www.styledynamix.co.uk/)
If you wanna know about 17's on a mk2 then Dizzy is yor man