GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: rambo25 on 11 November 2007, 14:00

Title: dump valve and filter
Post by: rambo25 on 11 November 2007, 14:00

whats the best dump valve and induction kit for my 1.8 gti turbo

Title: Re: dump valve and filter
Post by: samy_1800_turbo on 11 November 2007, 21:43

i got a pipercross foam filter with a forge 007p diverter valve, you get a nice whoosh noise wid it not to loud so it dosnt sound like a chav car. :smiley:

Title: Re: dump valve and filter
Post by: Holgate End on 11 November 2007, 21:45

Does that valve not give you the 'blackpool lights' syndrome on your dashboard and poor response tho Samy?

Title: Re: dump valve and filter
Post by: samy_1800_turbo on 11 November 2007, 21:58

dats the atmosphemic dump valve dat isnt very good for the car. iv got the forge replacement one which does the same job as the bosh standand valve but the forge can hold the higher boost better if you have a chipped car

Title: Re: dump valve and filter
Post by: Jonnys07 on 11 November 2007, 23:34

I just got my BMC CDA induction kit fitted today  :grin: Ok it increases fuel consumption but looks the part and gives off a gd roar. Pic below.........

(http://i237.photobucket.com/albums/ff31/jonnys07/CDAFitted.jpg)

Title: Re: dump valve and filter
Post by: 1688bran on 12 November 2007, 00:30

Quote from: Jonnys07 on 11 November 2007, 23:34

I just got my BMC CDA induction kit fitted today  :grin: Ok it increases fuel consumption but looks the part and gives off a gd roar. Pic below.........

(http://i237.photobucket.com/albums/ff31/jonnys07/CDAFitted.jpg)

    i got a BMC CDA in my car too. lokin at ur pic . u hvnt got a little filter to put on the secondary air pump inlet pipe .i advise u put a filter cuz u be suckin all the dirt ,oil and water thru it .wont do ur engine any good ...

Title: Re: dump valve and filter
Post by: Jonnys07 on 12 November 2007, 13:35

Sorry didnt realise that was taken whilst waiting for the filter to arrive. I fitted one about half an hour after the pic was taken. Well done for spotting it tho  :smiley:

Title: Re: dump valve and filter
Post by: 1688bran on 24 November 2007, 14:01

Quote from: Jonnys07 on 12 November 2007, 13:35

Sorry didnt realise that was taken whilst waiting for the filter to arrive. I fitted one about half an hour after the pic was taken. Well done for spotting it tho  :smiley:

   where did u get the filter from ............

Title: Re: dump valve and filter
Post by: Ashmond on 24 November 2007, 15:22

I have got a cold air feed and a forge splitR valve, which gives you the dumping sound and still recircs some of the air back into the engine so it doesnt make your ECU fail!

Title: Re: dump valve and filter
Post by: leeroy20vt on 24 November 2007, 16:11

Quote from: Ashmond on 24 November 2007, 15:22

I have got a cold air feed and a forge splitR valve, which gives you the dumping sound and still recircs some of the air back into the engine so it doesnt make your ECU fail!

were did u get ur filter from and how much if u dont mind me asking and wat is the cold air filter

Title: Re: dump valve and filter
Post by: richw911 on 24 November 2007, 21:06

Quote from: samy_1800_turbo on 11 November 2007, 21:43

i got a pipercross foam filter with a forge 007p diverter valve, you get a nice whoosh noise wid it not to loud so it dosnt sound like a chav car. :smiley:

I have the same pipercross and forge 007p Been spot on  :laugh: