GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Grazer on 28 October 2007, 21:29

Title: Part No. help
Post by: Grazer on 28 October 2007, 21:29

Anyone know the part number for the oil temp sensor for a 1990 1.6 8v Driver?  :smiley:

Title: Re: Part No. help
Post by: mattneck(Beavis) on 28 October 2007, 21:38

doesnt have one?  :huh:

are you trying to fit VDO gauges?

Title: Re: Part No. help
Post by: Grazer on 28 October 2007, 23:03

Quote from: mattneck on 28 October 2007, 21:38

doesnt have one?  :huh:

are you trying to fit VDO gauges?

As per pics here -

http://www.golfgtiforum.co.uk/index.php?topic=69265.0

Title: Re: Part No. help
Post by: Dolly on 28 October 2007, 23:14

028919081D
oil pressure switch
0,25BAR M10X1 1 pin blue /

N 0138115
seal
A10X13,5 /

Title: Re: Part No. help
Post by: Grazer on 28 October 2007, 23:18

Bloody 'ell!

You don't mess about there do you?

Thanks.  :wink:

Ps. Where did you get that info from?

Title: Re: Part No. help
Post by: mattneck(Beavis) on 29 October 2007, 09:39

thats a pressure switch.. for a pressure gauge.. not a temperature take off?

ive got a VDO sump plug with a temperature sender in the actual plug.. il get the company number i ordered mine from gloucester if you want it..

Title: Re: Part No. help
Post by: Agreeable Slick on 29 October 2007, 14:02

have a look in the etka thread.

Title: Re: Part No. help
Post by: Grazer on 29 October 2007, 14:15

Quote from: Slick#13 on 29 October 2007, 14:02

have a look in the etka thread.

I had a look in earlier, even registered with ETKA so I could have a better look at their site but it's not very clear, well to me anyway, which one i'm after.

I've removed the sensor and found that there was no "O" ring type behind it too.

On the back it states

0.15 - 0.45
0**919081C -  OB

(http://i35.photobucket.com/albums/d195/spleenlesswonder/VW%20Golf%20mk%202/PICT0011.jpg)

Title: Re: Part No. help
Post by: Agreeable Slick on 29 October 2007, 17:11

etka is a bit of a pain to use, if you don't know what you are looking for. That should be the same as the ones used across the board on all golf engines, have another browse through it, and see if you can find a part number for a sensor that has a .15-.45 bar rating.  :cool: they should cross over.

Title: Re: Part No. help
Post by: mattneck(Beavis) on 29 October 2007, 19:05

dont you need a twinpole sender for fitting VDOs alex? and then a T piece or a sump temp sender.. due to resistance levels and shtoof.. and, well, what the senders are made for full stop?  :undecided:

Title: Re: Part No. help
Post by: Grazer on 30 October 2007, 22:04

Got the part from the local GSF dealers in Liverpool, £2.93!!  :cool:

Having a go at fitting it in tomorrow and see what happens, fingers crossed.