GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: MandS on 24 July 2007, 18:07
-
Doing my first jobs on my GTi today :smiley:. Changed oil and filter, fixed alarm/immobiliser. Then I fitted a new airfilter and noticed that the feed into the airbox does not have a hose on it, just the airbox hole to fit a hose to :huh:. I asume I am missing a part here? If I get a hose where does it route to? What should be on the end of the hose?
-
The "hose" is only short, it curvs to the left and slots it to a hole with some rubber round it to keep it air tight, have a look at the scrappy or ask around on the forums :smiley:
If you stick your head in/round you might be able to see where it goes.
-
Cheers kayoss :smiley:. I'll have a look. I think some standard hose and a jubilee clip will do the job?
-
I'm not sure it might do... :huh:
-
Sounds like a good excuse to buy an induction kit if u ask me... :smug:
-
Just drill about 10 20mm holes in the bottom of you airbox it sounds the bollax and pull abit harder to :grin: