GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: kieg on 01 June 2007, 19:52

Title: driveshaft bolts
Post by: kieg on 01 June 2007, 19:52

hi does anyone know what tool is used to take the inner drive shaft bolts off and what size? i did a search but no luck

thanks

Title: Re: driveshaft bolts
Post by: monzablue16v on 01 June 2007, 20:30

8mm spline drive I think matey NOT a torx however........

It is LIKE a 12 point torx bit

Title: Re: driveshaft bolts
Post by: kieg on 01 June 2007, 22:16

any chance of a picture of one?

Title: Re: driveshaft bolts
Post by: Mart8V on 01 June 2007, 22:46

Draper do a full set of the heads- think Monza is right and it's the M8 bit.  Just make sure that the head bolts are clear and that you can get the bit in- you don't want to end up having to gring them off like some arse did.... Not speaking from experience or anything....!! :wink: :wink:

Title: Re: driveshaft bolts
Post by: kieg on 08 June 2007, 21:11

hi still having a bit of trouble figuring out what the splined tool actually is. can the tool be brought from halfords?

Title: Re: driveshaft bolts
Post by: Thom89 on 09 June 2007, 00:11

Go to Halfords and ask for an "8mm 12 sided male splined socket"  Heres what they look like.. http://cgi.ebay.co.uk/11Pc-METRIC-SPLINE-SET-5-12mm-1-2-DRIVE-SOCKET-CASE_W0QQitemZ160122571838QQihZ006QQcategoryZ30917QQtcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Tom

Title: Re: driveshaft bolts
Post by: Mart8V on 09 June 2007, 10:44

Some branches of Halfords don't stock them (ie my local one!) but any decent motor factors will have it.

Title: Re: driveshaft bolts
Post by: robiwill on 09 June 2007, 16:20

Hi you can buy a pline set however it is a fiddly job due to the length of it and getting to the driveshaft bolts.
This tool which we sell and only people that do on ebay makes the job very very easy.
sold well over 200 of them to gararges and veebub fans and always had excellent feedback.

Before we found these it took ages removing the bolts now its minutes.

go on treat yourself

http://cgi.ebay.co.uk/VW-GOLF-MK1-2-3-CORRADO-ETC-DRIVE-SHARFT-SPLINE-TOOL_W0QQitemZ320122552620QQihZ011QQcategoryZ9889QQtcZphotoQQcmdZViewItem

Title: Re: driveshaft bolts
Post by: VeeDubGTI16v on 09 June 2007, 16:57

tap it in with a hammer, then you know its not gonna round the bolt off.