GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: freakydeakie on 21 February 2007, 15:09
-
Turn your trial version into a fully registered version.
Copy link below into your browser and download file.
LINK NOW REMOVED - SEE MY OTHER POST FOR VERSION 311.2
Must have Vag-Com Installed 1st
Run Hack and select directory where Vag-Com is installed - hit start and bravo - full registered copy.
ENJOY!!!!!!!!!!!! :wink:
-
Cheers :cool:
-
Grab it while you can - after the end of the week I will have to shut down the FTP Server
-
thats a peach mate im surprised no-one else has been here! Cheers for hosting it - I realised it was from a private source when I downloaded it. Your a star :cool:
-
freakydeakie,
thanks for the info, i downloaded the update and seemed to be successful however when i ran the vag-com on my golf it picked up the two existing faults im aware of but still insisted i needed the full version in order to tell me what exactly the faults are? anything ive done wrong or indeed need to do extra? cheers andy
-
can some one email me a link so i can get the trial version pls
-
got it sorted and now registers as the full monty - thats great many thanks freakiedeakie,
Kris, the link your after is http://www.ross-tech.com ; download the shareware 409.1 or 311.2 for free or purchase the registered version from Ross-Tech's webside.
Cheers Andy
-
Hey Golfmad - Just recieved my cable today, loaded the hack which said it was a registered version. Done a scan on the ABS and its gone back to saying I need to activate it.
Are you sure that you managed to get the hack fully working, as now I'm abit sceptical as to whether the hack works or not.??
Cheers
-
if the cable is a proper ross tech one it will activate the software anyway wi no hack but they are $350 (£175 at home) each.
Try running the crack again wi the cable connected. ( I assume its an ebay cable)
-
hi yes, thats exactly what I did.
loaded the hack but didnt seem to register, re-started machine, plugged the lead in(from ebay seller) and re tried the hack, checked the vag-com details and it says its fully registered/activated. thats the easy part the difficult part was figuring out getting the inetrface port sorted on my laptop, cos the instructions from the website are pants.
good luck, b a shame if you cant get it sorted when you put me and others onto this!!
-
OK for all of you that are having trouble getting the 409.1 version to register as a full working copy, heres a new link to version 311.2, with a working hack.
http://www.thecracks.us/search.shtml?q=Vag-Com
Download the file VagCom v311.2 Keygen
The file is zipped up. Once unzipped, run the file - release3112n2.exe which will install Vag-Com.
Copy and paste the file tst.bin into the newly created vagcom directory.
Run the vagcom program and when it opens select "About"
Double click on the serial number and copy it.
Run VagComKeyGen311.2.exe and paste the serial number into the box, which will then give you a key.
Copy the key and paste into the "licence number" box in Vag-Com software and click activate.
This hack works 100%
Cheers - enjoy :wink:
freakydeakie
-
I used the hack and it worked, however I got a proper ross tech cable from a wholesale supplier for myself and needed version 607, got it from ross tech site, installed it and it said my status was "licence revoked" - it recognised the hacked version already on disc!
I had to delete all, clean entries out of the registry, then reinstall 607 and the cable i have then auto-registered and activated fully when I ran it on the car. All good now but be warned if you get a genuine cable it will lock you out if you have used the hack first.