GolfGTIforum.co.uk

General => General discussion => Topic started by: Kamaya on 13 February 2007, 18:49

Title: Licence plate bulbs
Post by: Kamaya on 13 February 2007, 18:49

After some help.... Mk3 golf....

Licence plate lights need changing, but the screws holding the cover in place have rusted so badly that I cannot get enough grip with a screwdriver to get them out. Had a quick look at the inside panel & I don't think it's possible to change the bulbs from the inside...?

Any help appreciated!

Title: Re: Licence plate bulbs
Post by: scottyboy on 13 February 2007, 19:36

i think your best is to drill the heads off the screws and use fresh screws

Title: Re: Licence plate bulbs
Post by: kittie on 17 February 2007, 11:49

Have you tried a giving them good WD soaking? Sometimes works.

Title: Re: Licence plate bulbs
Post by: Bluefox on 17 February 2007, 12:05

I nearly had this problem on mk mk2 yesderday, in the end a stout screwdriver and a lot of pressure stopped the screw head being damaged.
The screws need replacing, but for now it's ok.

Title: Re: Licence plate bulbs
Post by: Pwilliams on 18 February 2007, 11:12

Had the same problem on my mk3 yesterday but the plastic had also cracked so went at it with s screw driver smashed the plastic drilled the screws went down local scrappy got new covers and screws from local DIY and job done took a few hours instead of a few mins but sorted i the end