GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: mtaylor55 on 02 February 2007, 22:09

Title: Engine wiring looms
Post by: mtaylor55 on 02 February 2007, 22:09

Hi,
I'm putting a 2.0 16v ABF engine into my MK2 Scirocco. I didn't get a loom with the engine. Is a MK3 8v GTI the same loom? If not, can it be easily adapted.
16v looms seem to be thin on the ground.
Thanks
Mark

Title: Re: Engine wiring looms
Post by: rubjonny on 05 February 2007, 10:12

nope the engine managment is totally different for the 8v, you might be better off converting to 1.8 16v K-Jet managment, quite a bit cheaper and much more simple. You'll need:

ISV + loom + ISV controller
ECU + loom
Injectors (buy new brass mercedes ones from ebay, £50)
WUR
Inlet manifold + 5th injector
Fuel lines
Metering head