GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: heinz on 31 January 2007, 21:19

Title: Diagnostic port
Post by: heinz on 31 January 2007, 21:19

 Have just fitted a mk3 2.0 8v engine and wiring loom  I have the loom for diagnostic port but it only has 4 wires on two two pin plugs    not sure what diagnostic system it is as I thought obd2 had 5 wires? anyideas?
 Cheers Si

Title: Re: Diagnostic port
Post by: systemseiko on 31 January 2007, 22:29

The old Mk 3 GTi's are OBD1 compliant but you need a different connector and Vag.com or simliar fault code reader,  you can purchase one from E-Bay for around £8.00 from china.

http://cgi.ebay.co.uk/2x2-Adapter-VW-Audi-Skoda-diagnostic-OBD2-KKL-OBD-VAG-2_W0QQitemZ220075978799QQihZ012QQcategoryZ30921QQrdZ1QQcmdZViewItem (http://cgi.ebay.co.uk/2x2-Adapter-VW-Audi-Skoda-diagnostic-OBD2-KKL-OBD-VAG-2_W0QQitemZ220075978799QQihZ012QQcategoryZ30921QQrdZ1QQcmdZViewItem)

Cheap as chips