GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: jasonpi on 22 January 2004, 08:52

Title: how easy
Post by: jasonpi on 22 January 2004, 08:52

would it be to drop in a vr6 lump in a mk2????

Title: Re:how easy
Post by: Dizzie on 22 January 2004, 11:54

easy to bolt it in. harder to wire it up...

?3995 from Dubsport all in

Title: Re:how easy
Post by: jasonpi on 22 January 2004, 12:47

i can get a recon enihne for around 900 notes with wiringloom ecu etc etc...cant justify an extra 3000...how hard in all honesty is it to wire up???

Title: Re:how easy
Post by: Gambit on 22 January 2004, 13:38

yours is a wiring nightmare as you have the early spec loom (hazard light on the dash)

if you had the late spec loom then

you want the whole VR6 front end, engine, gearbox, loom, subframe, drives shafts the heap basically

unbolt your exisitng subframe, lift chassis up, drop out subframe with engine box & and replace with new one

v.much simplified terms!!

Title: Re:how easy
Post by: jasonpi on 22 January 2004, 14:06

 ??? no its ok then