GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: rowlers on 19 January 2007, 21:10

Title: merc injectors
Post by: rowlers on 19 January 2007, 21:10

i've just won these on ebay (hope they are correct fit!)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150079436943&rd=1&rd=1 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150079436943&rd=1&rd=1)


bargain or not???

Title: Re: merc injectors
Post by: mk2mark on 19 January 2007, 22:02

How could £8 not be a bargain?  :grin:

Title: Re: merc injectors
Post by: rowlers on 19 January 2007, 22:26

as long as they fit :grin:

Title: Re: merc injectors
Post by: Notis_kr_16v on 20 January 2007, 10:50

Quote from: rowlers on 19 January 2007, 21:10

i've just won these on ebay (hope they are correct fit!)

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150079436943&rd=1&rd=1 (http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ih=005&sspagename=STRK%3AMEWN%3AIT&viewitem=&item=150079436943&rd=1&rd=1)


bargain or not???

for the 16v??
i don't think that they fit! :sad:

Title: Re: merc injectors
Post by: rowlers on 20 January 2007, 11:32

we'll see, not bothered if they don't was worth a punt for a tenner :smiley:

They are the same as these:
http://cgi.ebay.co.uk/MERCEDES-BOSCH-INJECTOR-201-124-126-107-129-123-460-1_W0QQitemZ190018821074 (http://cgi.ebay.co.uk/MERCEDES-BOSCH-INJECTOR-201-124-126-107-129-123-460-1_W0QQitemZ190018821074)

as recomended by our guru rubjonny :wink:

Title: Re: merc injectors
Post by: rubjonny on 22 January 2007, 09:28

Yes they will fit ALL 1.8 16v engines, and older k-jet 8v, some of the later k-jets got different threads on the injectors :)

Title: Re: merc injectors
Post by: rowlers on 29 January 2007, 18:42

planning on fitting these and my braided lines this weekend.

How do you guys push the injectors home, don't fancy pushing on the solid bit of the fuel line :huh: :huh: :huh:.

Also do I need to use and ptfe tape or similar on the threaded joints?


Cheers

Title: Re: merc injectors
Post by: rubjonny on 30 January 2007, 10:28

If you're worries, use some pliers either side of the line or something to push against the threaded nut rather than the line itself.
You don't need too much force to get them back in though!
No need to use anything on the threads, but it wont hurt.

Title: Re: merc injectors
Post by: rowlers on 30 January 2007, 20:52

cheers again fella!