GolfGTIforum.co.uk

General => Car audio => Topic started by: Blue MK2 on 15 January 2004, 11:56

Title: how to remove interior panel bit...
Post by: Blue MK2 on 15 January 2004, 11:56

Can someone tell me how to remove the rear plastic panel next to the rear window.

It rattles like a betch >:(

thanx in advance,

Blue MK2

Title: Re:how to remove interior panel bit...
Post by: Dizzie on 15 January 2004, 13:37

 ??? eh

Title: Re:how to remove interior panel bit...
Post by: Blue MK2 on 15 January 2004, 16:08

the black plastic bit between the rear heated glass and the rear side window. It squeeks and ratles like mad

Title: Re:how to remove interior panel bit...
Post by: Dizzie on 16 January 2004, 09:48

The C pillar then?
mine's started to squeek too  >:(
I'll have to look and let you know.

Title: Re:how to remove interior panel bit...
Post by: Veedubgt18v on 16 January 2004, 18:27

grab it and tug hard?  :o  ;)  :P

Title: Re:how to remove interior panel bit...
Post by: Dizzie on 16 January 2004, 18:34

I had a look today...
obviously there the screw at the top. you have to remove the bit of shelf too. there's several 10mm nuts and it should pull free. the shelf holds the lower part of the panel down. I didn't actually take mine apart, but that's what I'm guessing is involved to remove it. I might remove mine and put some more dynamat behind them seeing as I have another roll spare.

Title: Re:how to remove interior panel bit...
Post by: Blue MK2 on 17 January 2004, 01:04

nice one. Mine sounds like there is a rat in the back. :-\

Ill give it a go 2moro