GolfGTIforum.co.uk
General => Car audio => Topic started by: Bazzer on 24 October 2006, 18:37
-
I know it's not ICE but... ah well....
I've been thinking my clifford concept 300 keeps going off when a gnat farts in Zimbabwe, so I want to adjust a sensor. Trouble is, I dunno which one, or how. So I was gonna get a cliffnet wiard kit and see what I could do with it. Then I had the bright idea of getting hold of the software first, and seeing. So I did. I got the standard and the Pro version :cool: but I can't find any sensitivity settings.... So back to square one?
Anyone handy with these things?
-
It will probably be a pot on the sensor itself only g5 clifford alarms allow it from CNW. Depends who installed the alarm and what they installed :laugh: helpful eh. shock sensor will be on steering column, proximity sensor near the middle of the car somewhere. HTH
-
Ah really....? Well I can't see anything in the cabin on the steering column, would it be behind the dash? I've got an aerial thing with G4 on it I can see inside the car, but not sure what type of sensor this is - should I investigate with a screwdriver?
-
i've got a g4 500 and its a pain in the ass! the guy that installed mine hid stuff all over the shop! pretty sure the sensor on mine is a little black box with a sort of dial on it.
what does the cliffnet thing do then? because mine seems to have a bunch of problems... ie the indicators don't flash when you arm/dis-arm, remote start doesn't work anymore. i've checked as much as i can and have checked all the fuses i can see but it all seems fine. does the cliffnet thing let you set up the alarms features?
-
You can get the software here:
http://www.clifford.com/g5/wizard/default.asp
and as bazzer said, check out what you could potentially do with it.
I have the cable section if you want to use it sometime. You still need to have had the output to it installed at the time and I am not sure it is standard.
:)