GolfGTIforum.co.uk

General => General discussion => Topic started by: vwgvr6 on 23 October 2006, 20:15

Title: Help "supercharging a VR6" VF- Engineering...
Post by: vwgvr6 on 23 October 2006, 20:15

http://www.vf-engineering.com/index.php?v=/kit_vw_corrado_euro.php

Has any one got one of these and is it as easy as they say. i would of thought i would of had to do some thing to the Engine internals

Quote

Stage 1 bolt on "ready to run"

am abit suspicious.

any help would be much appreciated...

Title: Re: Help "supercharging a VR6" VF- Engineering...
Post by: ...joe on 23 October 2006, 20:24

it all sounds about right and the amount of people that have used them must mean good things. i assume they just run at low boost to avoid any internal work?!

Title: Re: Help "supercharging a VR6" VF- Engineering...
Post by: vwgvr6 on 23 October 2006, 20:57

well from what I'v read and understand, the charger produces 6psi... and an increases from 170"4" to 250 HP...

Title: Re: Help "supercharging a VR6" VF- Engineering...
Post by: TIM20 on 23 October 2006, 21:09

No internal work is needed thats correct

the kit is meant to be fitted in about eight hours, but i would leave a weekend

the vr6 is meant to be good for about 400 bhp without major internal mods

there are many threads on the vr6 owners club and corrado forum (use search) and just google the forum names that should breing them up

lots of discussion on the best kits avaliable etc due to differences in belts used, software and chargewr bearings etc


hope this helps

Tim

Title: Re: Help "supercharging a VR6" VF- Engineering...
Post by: vwgvr6 on 24 October 2006, 11:50

  i done a search on vr6oc found all i needed there thank  :smiley: