GolfGTIforum.co.uk

Model specific boards => Golf mk4 => Topic started by: Adam-GTI-1.8T on 10 October 2006, 14:34

Title: COLD AIR INDUCTION KIT OFF EBAY.
Post by: Adam-GTI-1.8T on 10 October 2006, 14:34

Ive just bought one of these cold air inducion kits off ebay

http://cgi.ebay.co.uk/99-04-1-8T-GOLF-GTI-JETTA-A3-Cold-Air-Induction-Kit_W0QQitemZ260038730792QQihZ016QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I just wondered if anybody else had one as mine came today but it dosen have any instructions of how to fit it, so if anyone has one on there car and has some pics this would help me alot if you could post them up on here.

thanks

P.S there is also a pipercross vipper induction kit on ebay at the moment if anyone is interested just noticed it before.   :wink:

Title: Re: COLD AIR INDUCTION KIT OFF EBAY.
Post by: burna on 10 October 2006, 21:55

the chrome pipe goes from the airflow meter down behind the headlight where there is a small hole, enough to fit the pipe through with a bit 'force'. all the plastics behind the passenger light needs removing for better fitting

the arch liner needs pulling back so you can see were your filter will need to be attatched roughly near the horn.

i bought the same kit and had to cut the induction pipe at the airflow meter side for better fit.

WARNING- dont drive through puddles or streams with that kit fitted as it will act like a drinking straw and total the engine.

Title: Re: COLD AIR INDUCTION KIT OFF EBAY.
Post by: Adam-GTI-1.8T on 11 October 2006, 00:37

Thanks for your help i will give it a try.

Does the kit make alot of difference? (sound, performance etc)