GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: gofasterstripe on 23 September 2006, 12:43

Title: help with hand brake
Post by: gofasterstripe on 23 September 2006, 12:43

ok here's the problem, my handbrake was not operating on the drivers side rear wheel. i decided to adjust the cable, when tightening the nut, (one where the spring is), the  bolt sheared off. What am i going to have to replace? is it the calipoers or the full servo ?

Title: Re: help with hand brake
Post by: takethefifth on 24 September 2006, 22:39

Sounds like just the caliper unless you can get a replacement bolt. Not sure quite which bolt you mean, pic would be useful.

Title: Re: help with hand brake
Post by: gofasterstripe on 25 September 2006, 07:28

Sorry its the bolt that tightening up the tension on the spring that the handbrake cable attachs too on the caliper.