GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: dodgyracer on 07 August 2006, 01:24

Title: mfa not working
Post by: dodgyracer on 07 August 2006, 01:24

Hiya guys, i'm having trouble getting my mfa working, when i press the button nothing moves, it doesn't even go through the menu's any ideas??

Title: Re: mfa not working
Post by: ChrisO GolfO on 07 August 2006, 12:20

The Contacts on the Switch on the Stalk could do with a clean or take them apart and replace them...

Title: Re: mfa not working
Post by: dodgyracer on 07 August 2006, 13:39

i'ts a brand new stalk though

Title: Re: mfa not working
Post by: Gambit on 07 August 2006, 13:42

contacts has nothing to do with the MFA. there is a electrical plug/connector that comes off the MFA stalk. i assume you have connected it?

if not then take off the bottom of the steering column housing - 2 screws - and check its conntected correctly

if you connect it back to front then the slider switch on the stalk will move the MFA modes rather than the button!!

Title: Re: mfa not working
Post by: kappatango on 08 August 2006, 17:54

try pulling fuse 3 (on an 8v) for about 5 secs......need to take it right out.  I did it on my completely fooked MFA and now all working great.

Title: Re: mfa not working
Post by: frog on 08 August 2006, 21:05

Fuse 21 on 16v

Title: Re: mfa not working
Post by: rubjonny on 10 August 2006, 09:45

fuse 21 on a late spec MK2, fuse 3 on an early one ;)

Hazard switch on dash = early, hazard on column = late.