GolfGTIforum.co.uk

General => General discussion => Topic started by: spc on 21 July 2006, 15:35

Title: mk1 G60 - pedal box and clutch - help
Post by: spc on 21 July 2006, 15:35

I have 280mm discs on front and need to add a standard Mk2 16v servo and master cylinder.

Do I need to also change the pedal box to standard and if so will it support a Hydraulic clutch?  The car is already fitted with a hydraulic clutch.

Title: Re: mk1 G60 - pedal box and clutch - help
Post by: Judderi on 21 July 2006, 15:41

Bit of a confusing question. What pedal box do you currently have?

Title: Re: mk1 G60 - pedal box and clutch - help
Post by: spc on 21 July 2006, 16:14

sorry but not very mechanically minded, but learning fast!

I have a race style bias pedal box, with rear disc conversion, using a TSR kit.  The Bias can be adjusted from within the engine bay, have 3 drums, one for rear one for front and one for clutch (if that makes sense)

Title: Re: mk1 G60 - pedal box and clutch - help
Post by: Judderi on 24 July 2006, 08:34

Why are you needing to convert to a mk2 servo and cylinder then? I suppose as long as you have room and can line the linkage up you should be alright.