GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: frog on 14 July 2006, 21:53

Title: Stupid Questions Time
Post by: frog on 14 July 2006, 21:53

Are the arches and side skirts the same on a small bumper model as they are on a big bumper model?

I have a switch in the passenger side tray that is attached to a buzzer, have tried switching switch and buzzer goes off but nothing else seems to happen any ideas?

How do you remove the front seats?

Title: Re: Stupid Questions Time
Post by: Simpson on 14 July 2006, 22:32

no in response to furst question, and i have no idea what the buzzer is, does it have an immobiliser? and the front seats are removed in the middle of the seat subframe there is a 8 or 10 mm nut which needs undoing then the seats will slide back out of the runners  :smiley:

Title: Re: Stupid Questions Time
Post by: mix on 14 July 2006, 22:50

Its a 10mm bolt that holds it in place, you will also need a screw driver as there are some white clips at the back of the runners, these need to be removed so that they seat can then be slide backwards and out the runners when the front bolt has been removed....hope that makes sense

Title: Re: Stupid Questions Time
Post by: JMallows on 14 July 2006, 23:21

And the runner covers need to come off too :)

Title: Re: Stupid Questions Time
Post by: Veedubgt18v on 16 July 2006, 13:45

and no the arches and side skirts arent the same lol

Title: Re: Stupid Questions Time
Post by: Judderi on 17 July 2006, 12:36

And the bolt for the seats is at the front of the seat underneath where you sit.