GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: Barnzyuk on 07 July 2006, 17:58
-
Sorry for the terrible joke. i was hoping someone would be able 2 help me, i was wondering firstly, would the manifold, and downpipe off a 16v KR engine would bolt bolt onto my 8v PB engine, and if it did would i be able to keep the rest of the system, or will that need to be replaced with 16v system, and finally, if i did need 2 replace the other boxes, would all the mountings be the for a 16 valve system cheers
Jon
-
manifold wont fit no, but the downpipe will mate to the 8v manifold. The 16v system is 2.5" & the 8v system is 2", so you'll need a complete 16v system or have an adaptor made up :)
-
hmmmm interesting, sounds like a lot of work for not a huge gain, the main reason for me asking is my downpipe is blowing slightly, but i think i might just take the easy route and put another 8v downpipe on, unless anyone thinks it would be worthwhile going for the 16v downpipe back system?
-
Probably best to stay with the 8v set up, the cost of having a reducer made to mate the 16v and 8v fittings wont be worth the extra cost for the little (if any) gain
-
finally then, does anyone have any recommendations for somwhere 2 buy the downpipe from, i think there about 100 quid from GSF and thats a fair few beer tokens, or is going to be that kind of money everywhere
-
I'd go for a second hand genuine VW one, the GSF ones arnt much cop I've heard. Plus for all the work it takes to get them in, you don't want to fit a part you might be disapointed with!
-
will 16v 4-2-1 manifolds fit 8v's?
-
nope, the bolt patterns on a 16v are offset, whilst on an 8v they are in line.
-
ok that answers that one lol
-
;)