GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: richandhazel on 11 December 2003, 15:11
-
Have posted this once before, but I thought I would post it again as there are a few more people in the forum now......
It is possible to download the aforementioned manual, have a look at the following thread that has developed into 'the Bentley' thread:-
http://www.golfgtiforum.co.uk/index.php?board=5;action=display;threadid=4131;start=20
-
whats the crack with needing the disk for it to run properly
-
You tell me :-\ I'm an aircraft engineer, not a computer wiz........if you know how to make it work without burning to disc feel free to enlighten me ;)
I couldn't get the program to run without a disc inserted :(
whats the crack with needing the disk for it to run properly
-
hmm i shall have to investigate! once ive downloaded them all, only another 9 to go ::)
-
Yeah, takes a while doesn't it.........just glad I'm on broadband, can't imagine how long it'll take on dial-up :o
-
once ive finished downloading it ill see if i can help. You have to change the D: drive to the C: drive path on the bentley manual path
-
it wont work for me, gets to the very end of the install then says it cant launch that Jrew.exe
-
Jrew.exe ??? Not sure what that is ???
-
at the begining it says 'could not initualize installation (CRC)' ???
-
Have you and Gambit definately downloaded all 15 parts and then unzipped all 15 parts into another folder?
the folder with the unzipped parts should look like this:-
(http://homepage.ntlworld.com/richandhazel1/golfgti/links/Unzipped.JPG)
-
yaeh mate done that. unzipped them using winrar. ill give it another try later
-
Hmmmm, I'm sure you'll suss it, maybe there is something I've forgotten.........good luck.
Someone else must be able to get it to work..........I can't be the only one :-\
-
ok I downloaded all the bits stuck it on disc, hit the set up.exe button, now a web page has opened asking me to enter the registration number, if i do this will i get the FBI knowcking at my door fpr copyright infringement ;D
I though this worked of the disc?
-
ok couldn't wait for a reply, eneterd the 3Q number on th web page that opened up, all i get is a screen with 3 tabs, electrical,search adn another one that i cant remember, when i type in distributor in the search tab it says there is 108 results but then theres no results to click on where am i going wrong?
cheers
-
Have you and Gambit definately downloaded all 15 parts and then unzipped all 15 parts into another folder?
the folder with the unzipped parts should look like this:-
yeah mate i defo downloaded everything, and it installs everything but it cant launch the jrew.exe thing
its something to do with java enabling on my machine i think
im runnin NT4 which is a pile of shoite
ill try it at home on the lappy
-
Any joy Gambit - got the same problems !!
It uses some wankey JAVA runtime stuff - grrrrrr -I'll keep trying as this would be fecking useful, any help would be great ...
-
i havent been home yet!
what operating system are you running??
im gonna install it on a windows xp machine in work see if that sorts it
-
I'm running XP and the lastest 6.0.28 of IE - Looks like it uses an older JAVA enviroment and is not compatible with version 6 upwards ...
You can get your hands on the older stuff from SUN but not having much joy - grrrrrrrrrrr - computers eh who'd work with em !!!
-
i just installed it on XP go the same error message about the jrew.exe problem
went into internet option -> advanced and enabled everything
and it worked
-
ok couldn't wait for a reply, eneterd the 3Q number on th web page that opened up, all i get is a screen with 3 tabs, electrical,search adn another one that i cant remember, when i type in distributor in the search tab it says there is 108 results but then theres no results to click on where am i going wrong?
cheers
now i get this problem!!
-
ok couldn't wait for a reply, eneterd the 3Q number on th web page that opened up, all i get is a screen with 3 tabs, electrical,search adn another one that i cant remember, when i type in distributor in the search tab it says there is 108 results but then theres no results to click on where am i going wrong?
cheers
I had this same problem, try right clicking on the screen & select refresh!
I hope that helps :)
-
Gambit.
So i download them to one folder. When they are downloaded do I open them or do I just leave them?
Do I burn the 15 files to the disk or just the 1st one? ???
-
What verison of IE u using Gambit ??
For got sake this is drivin me nuts !!! Can anyone with this working post up what OS and version of IE you are using - cheers peps !!
-
you need to unzip the 15 files and put them all into one folder, once this is complete, you run the SCZ(?) exe in the folder, this then extracts them to another folder. you then run the setup in this folder to install on your pc
there is no need to burn it to a CD, if you burn it to disk it will need the disk to run
-
What verison of IE u using Gambit ??
For got sake this is drivin me nuts !!! Can anyone with this working post up what OS and version of IE you are using - cheers peps !!
head melting aint it!!
6.0.26 mate
-
Just a bit !
I'm gonna re-download the whole lot - and start again as I've done everything everyone has mention in here and still no joy .... i really need the fecking manual too !
Please no gloating if you have it working !!!! ( I know what you lot are like ;D )
-
im doing that too. im on my 6th download right now
-
I've just realised mine's not working anymore >:( used to work OK ???
Tried reinstalling it and it comes up with a hardlock error ??? ???
When I try and open it I get exactly the same problem as Gambit and Diluxe.
I've recently installed service pack 1 (XP) do you think that might have caused the problem?
Bloody PC's >:( >:( >:(
-
Whilst I'm at it does anyone know how I can enable my browser to download more then 2 files at a time? If I try and download 3, it waits until one of the first 2 have finished........I'm on broadband so there is no reason why I shouldn't be able to have multiple downloads going.
-
uninstall the XP update Rich the reinstall it later ???
-
Yeah, I think I'll try that........I'll go back to the previous restore point and see if it then works again.
-
Any joy after removing the service pack ??
I work as a developer so rather used to 'friggin' things - but this has really got me !!!
Cheers peps
-
Doing something else at the moment, will come back to that in a little while.
I'll let you know if it works.
Any idea what this 'hardlock' error is? I remember some issue with that when I installed ETKA 6.02 last week..........just wondering if it could be that that has caused the problem. Might have to try going back to a restore point prior to that installation.
I'll have another go at it in half hour or so..........
-
cheers VW2010, its now working luvvly jubbly ;D
-
Excellent glad someone has had some success..........what did you do to get it working.......now that mine has stopped working >:( >:(
-
when i click on SFX it says. 'Next volume Required' I click ok and it does not budge from there?
-
I just follwed you instruction word for word, downloaded 2 zip files at time, unzipped them to another folder, burnt the files to a disc , run set up, got a web page up entered the registration code and refreshed the screen as vw2010 said........and its working
i'm running xp by the way with the latest IE
-
Top man........hope you find it as useful as I have in the past........much better than the Haynes isn't it. What I like is that you can print off the relevant sections that you want for doing a job.........and it doesn't matter if the pages get dirty ;D
-
it didnt work because i forgot to extract the files to a new folder.
I get a message saying 'jbrew.exe ???'
-
ok another thing...
It loads up but the page is blank ???
Does that mean its not installed properly u think?
-
I just follwed you instruction word for word, downloaded 2 zip files at time, unzipped them to another folder, burnt the files to a disc , run set up, got a web page up entered the registration code and refreshed the screen as vw2010 said........and its working
i'm running xp by the way with the latest IE
Well I'll be, right click, refresh works :o
Strange because I tried clicking refresh and the other trick of hitting Ctrl and F5 and they don't work....well done VW2010.
-
ok another thing...
It loads up but the page is blank ???
Does that mean its not installed properly u think?
Right click and hit refresh........just worked for me ;D
-
YEAH!!!!!!!!!!!! THANX ;D ;D ;D
-
Excellent, glad a few are getting it to work......hope its worth the effort, I think so ;D
-
OHHH NO! It refreshes fine but when i click on a menu its blank again? I pressed refresh but it goes back to the main page? :( ???
-
Ah I remember that problem..........that was because I hadn't put the disc in, it needs the disc. Was it Gambit that said he found a way to make it work without the disc?
-
Nice one Rich. Works now. ;)
-
Great ;D I guess you did have to burn it to disc?
-
jUST CHECKED THAT THREAD AND BEJESUS, IS IT REALLY WORTH ALL THE HASTLE TO DOWNLOAD ??
Damn caps lock
-
Its nice to have the bentley manuel as it explaines how things work etc etc.
Rich i did need the CD to run it.
Do you have a download for ETKA because i downloaded it off Edonkey and i didnt know how to install it.
That ETKA online version also? :)
-
I got the ETKA from edonkey too. First one I downloaded didn't work, but the second one did.
The online ETKA is here:-
http://www.elcats.ru/audivw/
-
What download was it rich?
I downloaded ETKA Full version 6.1.exe or sumthing?
Is there a special way of installing it off edonkey like the bentley?
-
I dowloaded ETKA 6.02. It download as an ISO file,I used winace to extract it. You install the ETKA and then run hardlock.exe
Hope that helps.
-
whats ETKA, i want it everyone else has it ::)
-
ETKA is the VW/AUDI etc etc parts cd that your local vw/audi dealer uses for parts/part numbers.
I want as it has the diagrams of how the car/parts are put together. ;D
-
So were's all you peeps dowloading from,i never heard of edonkey?
-
So were's all you peeps dowloading from,i never heard of edonkey?
eMule can be downloaded from various sites but I used this one
http://www.emule-project.net/
If you're familiar with Kazaa, then you should be OK with eMule, if you've not used p2p file sharing before there's a good FAQ on the above site!
-
Ive just downloaded it. large file!
Still trying to install it as i got an error about my screen resolution.
Anyone know how to overcome this? Ive changed the screen resolution etc wil no effect?
-
I had that problem on my laptop. Thats running at a resolution of 1024 x 768
Didn't have the problem with my desktop which is running at 1280 x 1024
Doesn't it flash up with a message giving you the minimum resolution required to run it?
-
yeah it does but then i adjusted the reolution and it still gives me that error.
Do i unpack the ETKA first then the hardlock program after?
I did that but after the hardlock program finished it came to a setup program and vanished :-\
-
I unpacked the whole lot into one folder, installed the ETKA and then ran the hardlock.exe program. You might need to uninstall and then re-install with the correct resolution :-\
-
Rich sorry to bother you.
Got one more problem. Opened the hardlock after the etka installation and etka gives me an error ''hardlock not found'' any ideas?
-
Yeah, I'm sure I had that too. Can't remember how I got round that. I'll have another look at my installation........got a feeling I just persevered and got there in the end, but I'll check in case I've missed something.
-
Just checked a readme file that I created when I installed the software and, fortunately, I wrote down how I overcame that problem.
When you install the ETKA a directory will be created called: 'et_prog'
When you extract your 'hardlock.exe', it needs to be extracted into that directory.
Hope that helps/makes sense.
-
cheers for that. I looked in et prog and its in there for sure.
I also re installed hardlock to that file and still no luck? ::)