GolfGTIforum.co.uk
Model specific boards => Golf mk2 => Topic started by: bokken on 24 May 2006, 15:36
-
Can anyone identify where the various oil warning sensors/senders are in the engine bay please as I don't have a warning light on ignition. Cheers
-
you have 2 senders, low & high pressure. The low pressure sender is the black/brown one with a blue wire, high pressure is the white one with a yellow wire. If the car is a 16v both are in the oil filter housing, if its an 8v then the low pressure is on the side of the head and the high pressure is on the filter housing.
-
thanks - found them - now I've just got to figure out why I'm not getting any warning light on switching on???
-
It may be a problem with the oil pressure warning circuit board, the 'L' shaped circuit attached to the back of the speedo. A dodgy 'fix' for the oil pressure warning buzzer going off is to remove the board altogether :rolleyes:
-
tried the led? just a thought.
-
Thanks - next job is to replace instrument panel as rev counter and MFA don't work - this might do the job!! May thanks for suggestions
-
Try pullin gthe dash fuse for 30 seconds, this will normally fix a dodgy dash :)