GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: geo3 on 18 April 2006, 16:18

Title: abs warning light / stall,cut out
Post by: geo3 on 18 April 2006, 16:18: my abs warning lightÃƒâ€šÃ‚Â stays on all the time? clocks have got a mind of there own.
they work ok then they will go off, then they will stick with no readings
just recently its started to stall/cut out at low revs. untill its warmed up no problem starting but its a worry,as no engine power = no steeering

read something about " hall sensor" is this something to do with it ?
any one else had anything similar happen ?

any ideas?
Title: Re: abs warning light / stall,cut out
Post by: monkeyalan on 18 April 2006, 17:00: the abs light is probably one or more sensors knackered

stalling could be one of a few things. relays,dirty throttle body , faulty coil pack....
Title: Re: abs warning light / stall,cut out
Post by: Obvious on 18 April 2006, 18:31: Just had a problem with my ABS, turned out to be the offside front sensor.. Bulb had blown too so had a new bulb wired in as a new unit is Ãƒâ€šÃ‚£70 :sick: Not had any of the stalling/cutting out problems *touch wood*