GolfGTIforum.co.uk
Model specific boards => Golf mk4 => Topic started by: seahamfirefighter on 21 March 2006, 09:24
-
hi everybody ive had my golf gti mk4 180 6 speed 2003 (not anniversary)for about a month now and i love it im wondering about fitting a stainless exhaust system to it but need some advice what exhaust would you recommend and do i need to fit a 4motion rear valance and if so are they a hassle to fit and does anyone know ruffly how much they cost thanks for your time joe
-
Im pretty sure most manufacturers of exhausts will list them with the 4 motion valance fitted. Miltek do one have a look online for prices. The rear valances pop up on ebay now and again and just clip in once you remove your existing valance.
-
Milltek's the brand to go for..... They do one in 4 motion style (twin exit - need 4M valance), Anniversary style (single exit - need Anni valance), R32 style (single exit either side of the car - need R32 bumper) & OE 1.8T (diesel :grin:) style - no valance required.
I'm going the 4M route, myself (when funds allow). I've just purchased a new OE valance for £20. :cool:
-
thanks for the advice chaps its been very useful cheers
-
ive heard the 4motion valance is about £40 from the stealers i just cut mine out with a hacksaw blade as ive also heard the towing eye is in a different place on the 4 motion so you will have an empty cutout
-
my exhaust pipes are a little bit too big to fit in the 4mo valance so i too just cut the orginal valance lol
-
The 4 mo valance is £38 from the stealers(part number 1J6 807 521 C i believe) and yes the 4 mo towing eye is in a different place, does not really notice tho
-
thanks very much for your adivice cheers