GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: panzer on 21 November 2003, 14:23

Title: MK2 digi - need help sourcing hose.
Post by: panzer on 21 November 2003, 14:23

Just had a good look at the small vacum hoses at the inlet manifold.

They are a bit manky and i think one of them is leaking slightly. (they are the small ones that have that material webbing on. Where on earth can i get replacement tubing of this sort?

Any help much appreciated.

 ;)

Title: Re:MK2 digi - need help sourcing hose.
Post by: action al on 22 November 2003, 18:08

Halfords keep rolls of small diameter tubing behind the parts counter. they can cut it to length for you.
priced per metre. but you only get charged for what you need

Title: Re:MK2 digi - need help sourcing hose.
Post by: jedi16v on 22 November 2003, 23:16

you 'll be suprised how helpful (and resonable ) that volkswagon are with prices go in and ask they can put a diagram up on their computer screen just point out which part you want.

Title: Re:MK2 digi - need help sourcing hose.
Post by: golfvr6 on 23 November 2003, 00:48

Depends on the dealer, some are helpful , unfortunately some are not.

Title: Re:MK2 digi - need help sourcing hose.
Post by: modulater on 23 November 2003, 00:50

The sort of pipe your after is sold in any motor factors and should cost peanuts.

Title: Re:MK2 digi - need help sourcing hose.
Post by: panzer on 24 November 2003, 11:31

Thanks for the feedback everyone. Went down to Halfords and picked up some hose yesterday.  ;)

Title: Re:MK2 digi - need help sourcing hose.
Post by: Blue MK2 on 24 November 2003, 11:32

I need some. Are you on about the manky hoses that are covered in some kinda white cloth?

Title: Re:MK2 digi - need help sourcing hose.
Post by: Dizzie on 24 November 2003, 21:46

HKS (01480 861997) sell nice blue silicone vacume hose ;)
It aint' cheap @ ?18 for 2 metres, but finishes off the bay if you've got samco water hoses and blue HT leads :)