GolfGTIforum.co.uk
Model specific boards => Golf mk3 => Topic started by: BabyBhp on 07 January 2006, 15:20
-
also the wheels will be spaced out 25mm bcoz of the pcd adapters
just wanted to no will the arches rub?
-
if they are tt rims then why do you need adaptors?
i used to run tt rims on my vr and they will touch a bit unless you get your arches rolled or have the camber? altered,
-
just read your other post :rolleyes:
in my opinion i dont think you will get them on without having your arches pulled (big£Â£)
why not look into some audi replica wheels which you can get in 4x100 (often on fleabay)
-
dammm lol
i dont think you can get any replica 5-spoke tt's...well i cant find any on ebay
-
i had 17in tt alloys no mods lowered 70mm on coilovers
very slight rubbing so you should be ok
(http://i5.photobucket.com/albums/y177/carljames/PICT0284.jpg)
-
were they spaced out out at all though?
do you have a bigger pic?
-
you dont need spacers
they will go straight on
(http://i5.photobucket.com/albums/y177/carljames/PICT0284.jpg)
-
my golf is the blady 93 so it has 4-stud hubs :rolleyes:
your golf looks slick m8... do you have a big of the side of the car or front corner?
-
the car is not my car anymore ive sold it on
i just had some pictures of it to show that 17in tt alloys go on
but like you said you will have to have adapters if your cars 4 stud
but then you would have to have some serious arch mods
(http://i5.photobucket.com/albums/y177/carljames/PICT0283.jpg)
-
I have got a set of wolfrace voodoo 17" in 4stud (they look a bit like 6 spoke tt rims ) £100 if you are close enough to collect?
-
do you have any pics?...im in leicester