GolfGTIforum.co.uk

Model specific boards => Golf mk2 => Topic started by: Simmo on 15 December 2005, 18:02

Title: Alarming situation!!!
Post by: Simmo on 15 December 2005, 18:02

Me and a mate fitted a Toad Sterling alarm and immob to my Valver, only problem is we can't get the indicators to work.

Can anybody shed some light on the subject.

Its a 5dr if that makes any difference.

Simmo

Title: Re: Alarming situation!!!
Post by: Judderi on 16 December 2005, 09:22

what exactly do you mean? Do you mean the indicators dont flash when the alarm goes off? Or do you mean that they dont work when driving and going round corners?

Title: Re: Alarming situation!!!
Post by: Simmo on 16 December 2005, 18:39

Doh sorry, when I turn the alarm on and off they dont work.

Title: Re: Alarming situation!!!
Post by: 1 Lp on 17 December 2005, 12:54

DUNNO HOW U HAVE WIRED it up but, by the sounds of you've wired the incorrectly. The easy is to take the indicator connections from the steering column, not the fuse box.

If its not that then u've used the wrong wires from the alarm brain.

Title: Re: Alarming situation!!!
Post by: Simmo on 17 December 2005, 18:28

Ok Cheers I will have a look at that tomorrow

Title: Re: Alarming situation!!!
Post by: Fast on 01 January 2006, 14:49

I wired mine in through the hazard switch on the dash!

The bottom two terminals are for the lights, try wiring into them.

Churs