GolfGTIforum.co.uk

Model specific boards => Golf mk3 => Topic started by: steveozx7r on 27 October 2005, 12:43

Title: fault codes 00285 and 00588
Post by: steveozx7r on 27 October 2005, 12:43

Hi all,
I got the vag-com software after discovering previous owner had unhooked the bulbs for the airbag and ABS lights, (yep they stay on). Had 2 fault codes come up:

  00285 ABS wheel speed sensor
  front right (g45) out of range

  00588 Airbag igniter
  driver side (n95) resistance too high

Can anyone tell me where to start on these? ive had a look at the tube thing located within the drivers door sill and cant see anything unconnected.
As for the ABS shall i just take the wheel off and clean the sensor up?


MK3 8VALVE GTI 1996

Title: Re: fault codes 00285 and 00588
Post by: steveozx7r on 27 October 2005, 12:44

Forgot to add, I did clear the codes but they come back straight away, the lights stay on permanently.

Title: Re: fault codes 00285 and 00588
Post by: adyh on 27 October 2005, 13:39

Dont know about the airbag problem , i would suggest its a garage job . [Then if it goes off its their fault ]

As for the ABS sensor , give it a clean aas they are magnetic , otherwise swap it out , not a big job .