GolfGTIforum.co.uk
Model specific boards => Golf mk7 => Topic started by: davo245 on 12 July 2023, 07:11
-
Does anyone know if you could spec these wheels in gloss black from factory on a new car or were they only ever available in diamond cut?
-
As far as I know, genuine OEM Brescias were only ever available as diamond cut.
I’ve seen few all black sets on cars and assumed that either;
- they had been refurbished that way to eliminate the problem of white worm corrosion that invariably happens on diamond cut alloys
or
- they were cheap replicas in the style of OEM Brescias that were manufactured with a painted / powder coated finish rather than diamond cut.
-
As far as I know, genuine OEM Brescias were only ever available as diamond cut.
I’ve seen few all black sets on cars and assumed that either;
- they had been refurbished that way to eliminate the problem of white worm corrosion that invariably happens on diamond cut alloys
or
- they were cheap replicas in the style of OEM Brescias that were manufactured with a painted / powder coated finish rather than diamond cut.
This is my thoughts also had them on my 2018 new as an option but don't remember them being available in black as an option at that time not sure if available at later date as option.
-
As far as I know, genuine OEM Brescias were only ever available as diamond cut.
I’ve seen few all black sets on cars and assumed that either;
- they had been refurbished that way to eliminate the problem of white worm corrosion that invariably happens on diamond cut alloys
or
- they were cheap replicas in the style of OEM Brescias that were manufactured with a painted / powder coated finish rather than diamond cut.
This is my thoughts also had them on my 2018 new as an option but don't remember them being available in black as an option at that time not sure if available at later date as option.
I don’t think they were ever an option - if they had been, then I’d have expected one or two forum members on here to have had them on their mk7.5 GTI’s.
-
Wasn't an option.
-
Was an option on the GTD because I ticked the box!
No all black option though.
-
Was an option on the GTD because I ticked the box!
No all black option though.
Erm... eh?
-
Was an option on the GTD because I ticked the box!
No all black option though.
Erm... eh?
Yes, diamond cut Brescia alloys were an option, but never as an all black version. As said earlier, any that are all black will have been refurbished that way or they’ll be replicas in the style of OEM Brescias but painted / powder coated black.
-
Looking at the 2018 and 2019 MY brochure and price lists they were a £600 option, Diamond cut finish - look cool.
-
If they are all black and genuine they have been refurbished :smiley:
-
Looking at the 2018 and 2019 MY brochure and price lists they were a £600 option, Diamond cut finish - look cool.
The diamond cut finish might look cool, but I’d never have diamond alloys by choice;
- poor durability; the diamond cut face doesn’t provide a good surface for the clear lacquer to bond to. Any small amount of damage to the clear coat (it only takes a small stone chip) and if not touched in / repaired, white worm corrosion will set in, especially if diamond cut alloys are on a car that’s used as a daily driver during the winter months
- getting diamond cut alloys refurbished is more expensive than getting painted / powder coated alloys refurbished, and because the diamond cut refurb process involves cutting away a layer from the face of the wheel, they can only be refurbished twice; more than twice and the structural integrity of the wheel can be compromised
- diamond cut alloys seem to be quite susceptible to damage by careless or over-zealous tyre fitters; if they do damage them, they’ll probably deny it, leaving the car owner with the hassle and expense of getting the damage fixed.
Given a choice of diamond cut or painted / powder coated alloys, I’d always go for the latter.
If they are all black and genuine they have been refurbished :smiley:
Yes.
-
Looking at the 2018 and 2019 MY brochure and price lists they were a £600 option, Diamond cut finish - look cool.
The diamond cut finish might look cool, but I’d never have diamond alloys by choice;
- poor durability; the diamond cut face doesn’t provide a good surface for the clear lacquer to bond to. Any small amount of damage to the clear coat (it only takes a small stone chip) and if not touched in / repaired, white worm corrosion will set in, especially if diamond cut alloys are on a car that’s used as a daily driver during the winter months
- getting diamond cut alloys refurbished is more expensive than getting painted / powder coated alloys refurbished, and because the diamond cut refurb process involves cutting away a layer from the face of the wheel, they can only be refurbished twice; more than twice and the structural integrity of the wheel can be compromised
- diamond cut alloys seem to be quite susceptible to damage by careless or over-zealous tyre fitters; if they do damage them, they’ll probably deny it, leaving the car owner with the hassle and expense of getting the damage fixed.
Given a choice of diamond cut or painted / powder coated alloys, I’d always go for the latter.
If they are all black and genuine they have been refurbished :smiley:
Yes.
Probably tempting fate now but 4.5 years in only one nick on the rim edge that I fixed myself and x2 tyre changes on the front and x1 on the rear with no tyre fitter damage.
Still look cool.
-
Looking at the 2018 and 2019 MY brochure and price lists they were a £600 option, Diamond cut finish - look cool.
The diamond cut finish might look cool, but I’d never have diamond alloys by choice;
- poor durability; the diamond cut face doesn’t provide a good surface for the clear lacquer to bond to. Any small amount of damage to the clear coat (it only takes a small stone chip) and if not touched in / repaired, white worm corrosion will set in, especially if diamond cut alloys are on a car that’s used as a daily driver during the winter months
- getting diamond cut alloys refurbished is more expensive than getting painted / powder coated alloys refurbished, and because the diamond cut refurb process involves cutting away a layer from the face of the wheel, they can only be refurbished twice; more than twice and the structural integrity of the wheel can be compromised
- diamond cut alloys seem to be quite susceptible to damage by careless or over-zealous tyre fitters; if they do damage them, they’ll probably deny it, leaving the car owner with the hassle and expense of getting the damage fixed.
Given a choice of diamond cut or painted / powder coated alloys, I’d always go for the latter.
If they are all black and genuine they have been refurbished :smiley:
Yes.
Probably tempting fate now but 4.5 years in only one nick on the rim edge that I fixed myself and x2 tyre changes on the front and x1 on the rear with no tyre fitter damage.
Still look cool.
Lucky you - mine are asbolutely ruined, and I mean RUINED. They are actually a bit embarrassing...
-
Mine are also ruined, one nick from myself, then the rest 6+ all from tyre fitters and stone chips...Mine are actually very thickly lacquered 320 microns from memory, but not benefit when the stone chips take it away.
Shame all one colour looks awful in them imo.
-
Looking at the 2018 and 2019 MY brochure and price lists they were a £600 option, Diamond cut finish - look cool.
The diamond cut finish might look cool, but I’d never have diamond alloys by choice;
- poor durability; the diamond cut face doesn’t provide a good surface for the clear lacquer to bond to. Any small amount of damage to the clear coat (it only takes a small stone chip) and if not touched in / repaired, white worm corrosion will set in, especially if diamond cut alloys are on a car that’s used as a daily driver during the winter months
- getting diamond cut alloys refurbished is more expensive than getting painted / powder coated alloys refurbished, and because the diamond cut refurb process involves cutting away a layer from the face of the wheel, they can only be refurbished twice; more than twice and the structural integrity of the wheel can be compromised
- diamond cut alloys seem to be quite susceptible to damage by careless or over-zealous tyre fitters; if they do damage them, they’ll probably deny it, leaving the car owner with the hassle and expense of getting the damage fixed.
Given a choice of diamond cut or painted / powder coated alloys, I’d always go for the latter.
If they are all black and genuine they have been refurbished :smiley:
Yes.
Probably tempting fate now but 4.5 years in only one nick on the rim edge that I fixed myself and x2 tyre changes on the front and x1 on the rear with no tyre fitter damage.
Still look cool.
Knew I should have kept my mouth shut. Gave it a proper clean on Saturday and found a tiny chip on the offside rear wheel with a tiny bit of white worm, sanded and lacquered it 🤞 it doesn’t get worse.